CSDP Plus Servo Drive User Manual

SEt-43(2) P-OT Signal Function Selection
• Setting range: 0 x 0 to 0 x 1
• User Default: 0 x 1
• Change while the servo is OFF, and turn off the power and turn it back on
The set values are as follows.
0: Forbid forward revolution with P-OT signal
1: Always approve forward revolving operation
SEt-43(3) N-OT Signal Function Selection
• Setting range: 0 x 0 to 0 x 1
• User Default: 0 x 1
• Change while the servo is OFF, and turn off the power and turn it back on
The set values are as follows.
0: Forbid reverse revolution with N-OT signal.
1: Always approve reverse revolving operation
SEt-43(4) TG-ON Signal Function Selection
• Setting range: 0 x 0 to 0 x 1
• User Default: 0 x 0
• Change while the servo is OFF, and turn off the power and turn it back on
The set values are as follows.
0: ON when the speed is faster than the zero speed level (SEt-16)
1: ON when the current is higher than the current limit
(SEt-10, SEt-11, SEt-12, SEt-13)
156