CSDP Plus Servo Drive User Manual

Put 3 in the second digit of SEt-62 to allocate the /INHIB signal to DI#3
pin.
When 9 is set, it is always valid and when 0 is set, it is always invalid.
For instance, to keep /SV-ON always valid when the power is on
regardless of the wiring, put 9 in the first digit of SEt-59.
SEt-60 Input Signal Assignment 2
• Setting range: 0 x 0 to 0 x 9999
• User Default: 0 x 0765
• Change while the servo is OFF, and turn off the power and turn it back on
SEt-61 Input Signal Assignment 3
• Setting range: 0 x 0 to 0 x 9999
• User Default: 0 x 0000
• Change while the servo is OFF, and turn off the power and turn it back on
SEt-62 Input Signal Assignment 4
• Setting range: 0 x 0 to 0 x 9999
• User Default: 0 x 0000
• Change while the servo is OFF, and turn off the power and turn it back on
SEt-63 Input Signal Assignment 5
• Setting range: 0 x 0 to 0 x 9999
• User Default: 0 x 0080
• Change while the servo is OFF, and turn off the power and turn it back on
171