CSDP Plus Servo Drive User Manual

SEt-45(2) Speed Command Offset Auto
Adjustment
• Setting range: 0 x 0 to 0 x 1
• User Default: 0 x 0
• Changes while the servo is OFF
The set values are as follows.
0: Analog Speed Command Offset
1: Current Offset when the servo is OFF
2: Current Offset when the servo is ON
SEt-45(3) Speed Limit Method
• Setting range: 0 x 0 to 0 x 3
• User Default: 0 x 0
• Changes while the servo is OFF
The set values are as follows.
0: Motor Maximum Speed
1: SEt-67 Value
2: Analog Speed Command
3: The smaller value between the motor maximum speed and SEt-67
SEt-45(4) Motor Revolving Direction
• Setting range: 0 x 0 to 0 x 1
• User Default: 0 x 0
• Changes while the servo is OFF
This parameter determines the revolving direction of the motor. The
set values are as follows.
0: Forward Direction
1: Reverse Direction
160