Elektronika 2009-11.pdf - Instytut Systemów Elektronicznych

[33] Biani A., Centi S. Tombrlli S., Minunni M., Mascini M.: Development
of an optical RNA-based aptasensor for C-reactive protein.
Anal Bioannal Chem, 2008, 390, pp. 1077-1086.
[34] Kim K. S., et al.: The fabrication, characterization and application
of aptamer-functonalized Si-nanowire FET biosensor. Nanotechnology,
2009, 20, pp. 6pp.
[35] Mairal T., et al.: Aptamers: molecular tools for analytical applications.
Anal Bioanal Chem, 2008, 390, pp. 989-1007
[36] Balamurugan S., et al.: Surface immobilization methods for aptamer
diagnostic applications. Anal Bioanal Chem, 2008, 390,
pp. 1009-1021.
[37] Kang Y., et al.: Electrochemical detection of trombin by sandwich
approach using antibody and aptamer. Biochemistry, 2008, 73,
pp. 76-81.
[38] Henares T. G., Mizutani F., and Hisamoto H.: Current development
in microfluidic immunosensing chip. Analytica Chimica
acta, 2008, 6(11), pp. 17-30.
[39] Joshi M., et al.: Silanization and antibody immobilization on SU-
8. Applied Surface Science, 2007, 253, pp. 3127-3132
[40] Blagoi G., et al.: Functionalization of SU-8 photoresist surfaces
with IgG proteins. Applied Surface Science, 2008, 255, pp.
2896-2902.
[41] Meacham K.W., et al.: A Lithographically-Patterned, Elastic Multielectrode
Array for Surface Stimulation of Spinal Cord. Biomed
Microdevices, 2008. 10(2), pp. 259-269.
[42] Baek J. Y., et al.: Flexible polymeric dry electrodes for the longterm
monitoring of ECG. Sensors and Actuators A, 2008, 143,
pp. 423-429.
[43] Illiescu C., Chen B., and Miao J.: On the wet etching of Pyrex
glass. Sensors and Actuators A, 2008, 143, pp. 154-161.
[44] Liu J., et al.: Plasma assisted thermal bonding for PMMA microfluidic
chips with integrated metal microelectrodes. Sensors
and Actuators B, 2009, 141, pp. 646-651.
[45] Tsai Y. C.,. Ho C. L, and Liao S. W.: Nanobiosensors prepared by
electrodeposition of glucose oxidase in PMMA nanochannels
produced by atomic force microscopy nanolithography. Electrochemistry
Communications, 2009, 11, pp. 1316-1319.
[46] Castano-Alvarez M., Fernandez-Abedul M. T., and Costa-Garcia
A.: Amperometric detector designs for capillary electrophoresis microchips.
Journal of Chromatography A, 2006, 1109, pp. 291-299.
[47] Ishida A., Natsume M., and Kamidate T.: Microchip reversedphase
liquid chromatography with packed column and electrochemical
flow cell using polystyrene/poly(dimethylsilane). Journal
of Chromatography A, 2008, 1213, pp. 209-217.
[48] Noh H. S., Huang Y., and Hesketh P. J.: Parylene micromolding,
a rapid and low-cost fabrication method for parynele microchannel.
Sensors and Actuators B, 2004, 102, pp. 78-85.
[49] Li C., Han J., and Ahn C. H., Flexible biosensors on spirally rolled
micro tube for cardiovascular in vivo monitoring. Biosensors and
Bioelectronics 2007, 22, pp. 1988-1993.
[50] Woytasik M., et al.: Fabrication of planar and three-dimensional
microcoils on flexible substrates. Microsyst Technol, 2006, 12.
[51] Dawoud, A. A., et al.: Separation of catecholamines and dopaminederived
DNA adduct Rusing a microfluidic device with electrochemical
detection. Sensors and Actuators B 2006, 120, pp. 42-50.
[52] Huang C. J., et al.: Integrated microfluidic systems for automatic
glucose sensing and insulin injection. Sensors and Actuators B
2007, 122, pp. 461-468.
[53] Morin, F., et al.: Constraining the connectivity of neuronal networks
cultured on microelectrode arrays with microfluidic techniques:
A step towards neuron-based functional chips. Biosensors
and Bioelectronics 2006, 21, pp. 1093-1100.
[54] Dawoud, A. A., Kawaguchi T., and Jankowiak R.: In-channel
modification of electrochemical detector for the detection of biotargets
on microchip. Electrochemistry Communications, 2007,
9, pp. 1536-1541.
[55] Liu C. and Cui D. F.: Design amd fabrication of poly(dimethylsiloxane)
electrophoresis microchip with integrated electrodes.
Microsyst Technol, 2005, 11, pp. 1262-1266.
[56] Baldini F., et al.: An optical PMMA biochip based on fluorescence
anisotropy: Application to C-reactive protein assay. Sensors and
Actuators B, 2009, 139, pp. 64-68.
[57] Rauf S., Ihsan A., Akharat K., Ghuri M. A., Rahman M., Anwar M.
A., Khalid A. M.: Glucose oxidase immobilization on a novel cellulose
acetate-polymethylmetthacrylate membrane, Journal of
Biotechnology 2006,121, pp. 251-360
[58] Kakuta M. H. T., Kazuno S., Murayama K., Ueno T.: Development
of the microchip-based repeatable immunoassay system
for clinical diagnosos. Measurement Science and Technology,
2006, 17, pp. 3189-3194.
[59] Messina G. A., Panini N. V., Martinez N. A., Raba J.: Microfluidic
immunosensor design for the quantification of interleukin-6in
human serum samples. Analytical Biochemistry, 2008, 380, pp.
262-267.
[60] Kandimalla V. B., Necta N. S., Karanth N. G., Thakur M. S.,
Roshini K. R., Reni B. E. A., Pasha A., Karanth N. G. K.: Regeneration
of ethyl parathion antibodies for repeated use in immunosensor:
A study on dissociation of antigens from antibodies.
Biosensors and Bioelectronics, 2004, 20, pp. 902-905.
[61] Liu Y.: Electrochemical detection of prostate-specific antigen
based on gold colloids/alumina derived sol-gel film, Thin Solid
Films, 2008, 516, pp.1803-1808.
ELEKTRONIKA 11/2009 83