Volume 8 – Mechanical and Electrical Services - Malaysia Geoportal

Chapter 5 PLANT MANAGEMENT AND CONTROL
Factors to consider:-
a) Duty List - See section 3.1 (a)
b) Duty Roster - See Section 3.1 (b)
c) Maintenance and overhaul programme - to be given or prepared by the maintenance
supervisor so that maintenance can be carried put according to Maintenance Schedule
(Appendix 5H) of the Plant.
d) Training of maintenance personnel - to improve and update their skill and knowledge so
that repair and maintenance can be carried out more efficiently and effectively.
e) Inspection report - Normally carried out at regular intervals (annually or half-annually) on
the plants which help to formulate the future maintenance and overhaul programme.
The management and control of operation and maintenance personnel is by one person who is
normally the engineer in charge. A typical organization chart for the management and control of
personnel is as shown below:-
Fig. 5.2 Maintenance Personnel Chart
March 2009 5-5