ts_127007v110800p

Recommendations

Info

3GPP TS 27.007 version 11.8.0 Release 11 101 ETSI TS 127 007 V11.8.0 (2013-10) 8.7 Keypad control +CKPD Table 66: +CKPD action command syntax Command +CKPD=[,[,]] +CKPD= Possible response(s) +CME ERROR: Description Execution command emulates MT keypad by giving each keystroke as a character in a string . *0.1 seconds is the time to stroke each key and *0.1 seconds is the length of pause between two strokes. If emulating fails in an MT error, +CME ERROR: is returned. Refer subclause 9.2 for values. This command should be accepted (OK returned) before actually starting to press the keys. Thus unsolicited result codes of key pressings and display events can be returned (refer subclause "Mobile Termination event reporting +CMER"). Defined values : string of characters representing keys as listed in the following table 67 (based on PCCA STD-101 [17] Annex I table I-3). Colon character (IRA 58) followed by one character can be used to indicate a manufacturer specific key not listed here. All characters from a semicolon character (IRA 59) to the next single semicolon character are treated as alpha entries and are not converted to key equivalents. All semicolon characters inside alpha entries should be duplicated in the TE and stripped to one before entering to the MT. Pause character (IRA 87 or 119) can be used to pause between key pressings for a time specified by . All IRA values not listed here are reserved. Table 67: Character codes Char IRA (dec) Comment (+ some known key symbols) # 35 hash (number sign) % 37 percent sign (P) * 42 star (*) 0... 9 48... 57 number keys : 58 escape character for manufacturer specific keys ; 59 escape character for string entering < 60 left arrow > 62 right arrow @ 64 alpha key (α/ABC) A/a 65/97 channel A (A) B/b 66/98 channel B (B) C/c 67/99 clear display (C/CLR) D/d 68/100 volume down E/e 69/101 connection end (END) F/f 70/102 function (FCN) L/l 76/108 phone lock (LOCK) M/m 77/109 menu (MENU) P/p 80/112 power (PWR) Q/q 81/113 quiet/mute (MUTE) R/r 82/114 recall last number (R/RCL/MR) S/s 83/115 connection start (SEND) T/t 84/116 store/ memory (STO/M/M+) U/u 85/117 volume up V/v 86/118 down arrow W/w 87/119 pause character X/x 88/120 auxiliary (AUX) Y/y 89/121 delete last character (C) ETSI
3GPP TS 27.007 version 11.8.0 Release 11 102 ETSI TS 127 007 V11.8.0 (2013-10) Char IRA (dec) Comment (+ some known key symbols) [ 91 soft key 1 ] 93 soft key 2 ^ 94 up arrow , : integer type 0...255 0... 25.5 seconds (default values are manufacturer specific, but should be so long that a normal MT can handle keystrokes correctly) Implementation Mandatory for MT not supporting the +CPIN command and supporting AT commands only. 8.8 Display control +CDIS Table 68: +CDIS parameter command syntax Command +CDIS=[[,[,...]]] +CDIS +CDIS= Possible response(s) +CME ERROR: +CDIS: [,[,...]] +CME ERROR: +CDIS: [,[,...]] +CME ERROR: Description Set command is used to write the contents of MT text type display elements. An element can consist of one character or several characters. The order of element parameters should follow the rule: first is the element in upper left corner, second is the next element to the right and so on. The last element is the element in lower right corner. The number of elements is MT specific. If MT does not allow writing to its display or MT is not currently reachable, +CME ERROR: is returned. Refer subclause 9.2 for values. If certain element is not writable, setting of it should be ignored. If element parameter is empty field, element shall remain in the previous value. NOTE 1: This command cannot be used to write to a display which sum of element lengths exceed the length of the command line buffer of the TA. Read command returns the contents of MT display elements. If field is empty (not empty string), MT does not allow the reading of corresponding element. If MT is not currently reachable, +CME ERROR: is returned. Refer subclause 9.2 for values. Test command returns maximum length of each display element. If MT does not offer the length of elements, fields should be empty. If MT is not currently reachable, +CME ERROR: is returned. Refer subclause 9.2 for values. NOTE 2: MT manufacturer should offer the order and maximum length of elements. Defined values : string type parameter using character set specified by command Select TE Character Set +CSCS : integer type parameter giving the maximum length of corresponding parameter Implementation Optional. ETSI
Page 1 and 2:
ETSI TS 127 007 V11.8.0 (2013-10) T
Page 3 and 4:
3GPP TS 27.007 version 11.8.0 Relea
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52: 3GPP TS 27.007 version 11.8.0 Relea
Page 101: 3GPP TS 27.007 version 11.8.0 Relea
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

ts_127007v110800p

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?