ts_127007v110800p

Recommendations

Info

3GPP TS 27.007 version 11.8.0 Release 11 179 ETSI TS 127 007 V11.8.0 (2013-10) 3GPP TS 23.041 [100] subclause 9.4.1.3.2, and for E-UTRAN see 3GPP TS 36.331 [86] subclause 6.3.1 SystemInformationBlockType10). Implementation Optional. 8.71 IMS registration information +CIREG Table 8.71-1: +CIREG parameter command syntax Command Possible response(s) +CIREG=[] +CME ERROR: +CIREG +CIREG: ,[,] +CIREG= +CIREG: (list of supported s) Description The set command controls the presentation of an unsolicited result code +CIREGU: [,] when there is a change in the MT's IMS registration information. The read command returns , that shows whether reporting is enabled or disabled, that shows whether one or more of the public user identities are registered and optionally , that shows the status of the MT's IMS capabilities. For , all relevant values are always summarized and reported as a complete set of IMS capabilites in the unsolicited result code. The test command returns the supported values for . Defined values : integer type. Enables or disables reporting of changes in the MT's IMS registration information. 0 disable reporting. 1 enable reporting (parameter ). 2 enable extended reporting (parameters and ). : integer type. Indicates the IMS registration status. The UE is seen as registered as long as one or more of its public user identities are registered with any of its contact addresses, see 3GPP TS 24.229 [89]. 0 not registered. 1 registered. : numeric value in hexadecimal format. The value range is from 1 to FFFFFFFF. It is a sum of hexadecimal values, each representing a particular IMS capability of the MT. The MT can have IMS capabilites not covered by the below list. This parameter is not present if the IMS registration status is "not registered". 1 RTP-based transfer of voice according to MMTEL, see 3GPP TS 24.173 [87]. This functionality can not be indicated if the UE is not available for voice over PS, see 3GPP TS 24.229 [89]. 2 RTP-based transfer of text according to MMTEL, see 3GPP TS 24.173 [87]. 4 SMS using IMS functionality, see 3GPP TS 24.341 [101]. 8 RTP-based transfer of video according to MMTEL, see 3GPP TS 24.173 [87]. The hexadecimal values 10, 20, 40 … 80000 are reserved by the present document. EXAMPLE: The parameter =5 means that both RTP-based transfer of voice according to MMTEL and SMS using IMS functionality can be used. ETSI
3GPP TS 27.007 version 11.8.0 Release 11 180 ETSI TS 127 007 V11.8.0 (2013-10) Implementation Optional. 8.72 Availability for SMS using IMS +CASIMS Table 8.72-1: +CASIMS parameter command syntax Command +CASIMS=[] +CASIMS +CASIMS= Possible response(s) +CASIMS: +CASIMS: (list of supported s) Description Set command informs the MT whether the UE is currently available for SMS using IMS (see 3GPP TS 24.229 [89]). The information can be used by the MT to determine the need to remain attached for non-EPS services, as defined in 3GPP TS 24.301 [83]. Read command returns the UE's SMS using IMS availability status, as stored in the MT. Test command returns supported values. Defined values : integer type. The UE's SMS using IMS availability status. 0 SMS using IMS is not available 1 SMS using IMS is available Implementation Optional. 8.73 Monitor of current calls +CMCCS Table 8.73-1: +CMCCS parameter command syntax Command +CMCCS= +CMCCS +CMCCS= Possible response(s) when =1 and command successful: +CMCCS: (list of supported s) +CMCCS: +CMCCS: (list of supported s) Description This command activates or deactivates a call monitoring function in the ME. When this function is activated in the ME, the ME informs about events for calls with unsolicited result codes. The purpose of the call monitoring function is to: 1) gather relevant information for the detected calls in a TE; and 2) make it possible for the TE to display call state information for ongoing calls. The unsolicited result code+CMCCSI is used for basic call information. ETSI
Page 1 and 2:
ETSI TS 127 007 V11.8.0 (2013-10) T
Page 3 and 4:
3GPP TS 27.007 version 11.8.0 Relea
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130: 3GPP TS 27.007 version 11.8.0 Relea
Page 179: 3GPP TS 27.007 version 11.8.0 Relea
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

ts_127007v110800p

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?