ts_127007v110800p

Recommendations

Info

3GPP TS 27.007 version 11.8.0 Release 11 67 ETSI TS 127 007 V11.8.0 (2013-10) This command allows control of the supplementary service Call Waiting according to 3GPP TS 22.083 [5] and Communication Waiting according to 3GPP TS 24.607 [137]. Activation, deactivation and status query are supported. When querying the status of a network service (=2) the response line for 'not active' case (=0) should be returned only if service is not active for any . Parameter is used to disable/enable the presentation of an unsolicited result code +CCWA: ,,,[][,[,,[,]]] to the TE when call waiting service is enabled. The unsolicited result code +CCWA does not support numbers of the SIP URI format. The call waiting information can also be reported in unsolicited result codes +CMCCSS / +CMCCSSEND, enabled with +CMCCS=3 (see AT command "monitor of current calls +CMCCS"). The unsolicited result codes +CMCCSS / +CMCCSSEND support numbers of the SIP URI format. Command should be abortable when network is interrogated. Test command returns values supported as a compound value. Defined values : integer type (se<strong>ts</strong>/shows the result code presentation status to the TE) 0 disable 1 enable : integer type (when parameter is not given, network is not interrogated) 0 disable 1 enable 2 query status : is a sum of integers each representing a class of information (default 7 - voice, data and fax) 1 voice (telephony) 2 data (refers to all bearer services; with =2 this may refer only to some bearer service if TA does not support values 16, 32, 64 and 128) 4 fax (facsimile services) 8 short message service 16 data circuit sync 32 data circuit async 64 dedicated packet access 128 dedicated PAD access : integer type 0 not active 1 active : string type phone number of calling address in format specified by : type of address octet in integer format (refer 3GPP TS 24.008 [8] subclause 10.5.4.7) : optional string type alphanumeric representation of corresponding to the entry found in phonebook; used character set should be the one selected with command Select TE Character Set +CSCS ETSI
3GPP TS 27.007 version 11.8.0 Release 11 68 ETSI TS 127 007 V11.8.0 (2013-10) : integer type. This parameter can provide details why does not contain a calling party BCD number (refer 3GPP TS 24.008 [8] subclause 10.5.4.30). 0 CLI valid 1 CLI has been withheld by the originator (refer 3GPP TS 24.008 [8] table 10.5.135a/3GPP TS 24.008 code "Reject by user") 2 CLI is not available due to interworking problems or limitations of originating network (refer 3GPP TS 24.008 [8] table 10.5.135a/3GPP TS 24.008 code "Interaction with other service") 3 CLI is not available due to calling party being of type payphone (refer 3GPP TS 24.008 [8] table 10.5.135a/3GPP TS 24.008 code "Coin line/payphone") 4 CLI is not available due to other reasons (refer 3GPP TS 24.008 [8] table 10.5.135a/3GPP TS 24.008 code "Unavailable") When CLI is not available (=2, =3 or =4), shall be an empty string ("") and value will not be significant. Nevertheless, TA may return the recommended value 128 for ((TON/NPI unknown in accordance with 3GPP TS 24.008 [8] subclause 10.5.4.7). When CLI has been withheld by the originator, (=1) and the CLIP is provisioned with the "override category" option (refer 3GPP TS 22.081 [3] and 3GPP TS 23.081 [40]), and is provided. Otherwise, TA shall return the same setting for and as if the CLI was not available. : string type subaddress of format specified by : type of subaddress octet in integer format (refer 3GPP TS 24.008 [8] subclause 10.5.4.8) : optional digit type parameter indicating that the eMLPP priority level of the incoming call. The priority level values are as defined in eMLPP specification 3GPP TS 22.067 [54]. Implementation Optional. 7.13 Call related supplementary services +CHLD Table 46: +CHLD action command syntax Command +CHLD= +CHLD= Possible response(s) +CME ERROR: +CHLD: (list of supported s) Description This command allows the control of the following call related services: - a call can be temporarily disconnected from the MT but the connection is retained by the network; - multiparty conversation (conference calls); - the served subscriber who has two calls (one held and the other either active or alerting) can connect the other parties and release the served subscriber's own connection. Calls can be put on hold, recovered, released, added to conversation, and transferred similarly as defined in 3GPP TS 22.030 [19]. Refer subclause 9.2 for possible values. This is based on the supplementary services HOLD (Call Hold; refer 3GPP TS 22.083 [5] clause 2 and 3GPP TS 24.610 [135]), MPTY / CONF (MultiParty; refer 3GPP TS 22.084 [22] and Conference; refer 3GPP TS 24.605 [133]) and ECT (Explicit Call Transfer; refer 3GPP TS 22.091 [30] and 3GPP TS 24.629 [139]). ETSI
Page 1 and 2:
ETSI TS 127 007 V11.8.0 (2013-10) T
Page 3 and 4:
3GPP TS 27.007 version 11.8.0 Relea
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18: 3GPP TS 27.007 version 11.8.0 Relea
Page 67: 3GPP TS 27.007 version 11.8.0 Relea
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

ts_127007v110800p

Create successful ePaper yourself

Delete template?

Save as template?