ts_127007v110800p

3GPP TS 27.007 version 11.8.0 Release 11
130
ETSI TS 127 007 V11.8.0 (2013-10)
0 Disable automatic time zone update via NITZ.
1 Enable automatic time zone update via NITZ.
Implementation
Optional.
8.41 Time zone reporting +CTZR
Table 101: +CTZR parameter command syntax
Command
Possible response(s)
+CTZR=[] +CME ERROR:
+CTZR
+CTZR:
+CTZR=
+CME ERROR:
+CTZR: (list of supported
s)
+CME ERROR:
Description
This set command controls the time zone change event reporting. If reporting is enabled the MT returns the unsolicited
result code +CTZV: , or +CTZE: ,,[] whenever the time zone is changed. The MT
also provides the time zone upon network registration if provided by the network. If setting fails in an MT error,
+CME ERROR: is returned. Refer subclause 9.2 for values.
Read command returns the current reporting settings in the MT.
Test command returns supported -values.
NOTE:
The Time Zone reporting is not affected by the Automatic Time Zone setting command, +CTZU.
Defined values
: integer type value indicating:
0 disable time zone change event reporting.
1 Enable time zone change event reporting by unsolicited result code +CTZV: .
2 Enable extended time zone reporting by unsolicited result code +CTZE: ,,[].
: string type value representing the sum of the local time zone (difference between the local time and GMT
expressed in quarters of an hour) plus daylight saving time. The format is "±zz", expressed as a fixed width, two
digit integer with the range -48 ... +56. To maintain a fixed width, numbers in the range -9 ... +9 are expressed
with a leading zero, e.g. "-09", "+00" and "+09".
: integer type value indicating whether includes daylight savings adjustment;
0 includes no adjustment for Daylight Saving Time
1 includes +1 hour (equals 4 quarters in ) adjustment for daylight saving time
2 includes +2 hours (equals 8 quarters in ) adjustment for daylight saving time
: string type value representing the local time. The format is "YYYY/MM/DD,hh:mm:ss", expressed as
integers representing year (YYYY), month (MM), date (DD), hour (hh), minute (mm) and second (ss). This
parameter can be provided by the network at the time of delivering time zone information and will be present in
the extended time zone reporting unsolicited result code if provided by the network.
ETSI