ts_127007v110800p

3GPP TS 27.007 version 11.8.0 Release 11
122
ETSI TS 127 007 V11.8.0 (2013-10)
Defined values
: integer type
0 Disable the call meter warning event
1 Enable the call meter warning event
Implementation
Optional.
8.29 Power class +CPWC
Table 89: +CPWC parameter command syntax
Command
Possible response(s)
+CPWC=[[,]] +CME ERROR:
+CPWC
+CPWC: ,,
[,,,[...]]
+CPWC=
+CME ERROR:
+CPWC: list of supported (,(list of
s)) pairs
+CME ERROR:
Description
This command is used to set the preferred MT power class for each GSM frequency band supported. The interaction of
this setting with the selected bearer service (+CBST and HSCSD commands) is manufacturer specific (for example,
selecting a multislot operation might reduce the power class automatically). If setting fails in an MT error,
+CME ERROR: is returned. Refer subclause 9.2 for values.
Read command returns the currently selected output power class and default output power class for each supported
frequency band (as defined by MT manufacturer). Parameter and its associated power class parameters refer
to the currently used frequency band. For example, +CPWC: 2,1,1,5,4,0 in case of a dual-band MT currently
using band GSM1800, for which the power class is currently set to 2, the default being class 1, and for which the
currently set power class value for GSM900 is class 5 the default being class 4.
Test command returns supported bands and their power classes. For example,
+CPWC: (0,(0,4,5)),(1,(0-2)) in case of a dual-band handheld MT.
Defined values
, s, s: integer type
0 default (not applicable to s or s)
1… MT output power class as in 3GPP TS 45.005 [38]
, s:
0 GSM900
1 GSM1800
2 reserved for GSM1900
3 GSM 400
ETSI