ts_127007v110800p

3GPP TS 27.007 version 11.8.0 Release 11
48
ETSI TS 127 007 V11.8.0 (2013-10)
This command sets the date format via MMI of the date information presented to the user, which is specified by use of
the parameter. The affects the date format on the phone display and doesn't affect the date format of
the AT command serial interface. The command also sets the date format of the TE-TA interface, which is specified by
use of the parameter (e.g. the affects the of +CCLK and +CALA). If the parameter is
omitted ("+CSDF=","+CSDF=","+CSDF=,"),then this sets the default value.
Defined values
: integer type
NOTE 1: It is manufacturer specific which modes that are supported.
1 DD-MMM-YYYY
NOTE 2: Presentation of MMM is language dependent.
2 DD-MM-YY
3 MM/DD/YY
4 DD/MM/YY
5 DD.MM.YY
6 YYMMDD
7 YY-MM-DD
8-255 Manufacturer specific
: integer type
1 yy/MM/dd
2 yyyy/MM/dd
all other values are reserved by the present document
NOTE 3: The format of +CCLK and +CALA "yy/MM/dd,hh:mm:ss±zz" when =1 and it is
"yyyy/MM/dd,hh:mm:ss±zz" when =2. If the MT does not support time zone information
then the three last characters may be omitted (see +CCLK command).
Implementation
Optional
6.23 Silence command +CSIL
Table 30: +CSIL parameter command syntax
Command
+CSIL=[]
+CSIL
+CSIL=
Possible response(s)
+CME ERROR:
+CSIL:
+CME ERROR:
+CSIL: (list of supported s)
+CME ERROR:
Description
Set command enables/disables the silent mode. When the phone is in silent mode, all sounds from MT are suppressed
except voice.
ETSI