ts_127007v110800p

Recommendations

Info

3GPP TS 27.007 version 11.8.0 Release 11 97 ETSI TS 127 007 V11.8.0 (2013-10) 4 disable phone both transmit and receive RF circuits 5...127 reserved for manufacturers as intermediate states between full and minimum functionality : integer type 0 do not reset the MT before setting it to power level NOTE 2: This shall be always default when is not given. 1 reset the MT before setting it to power level Implementation Optional. 8.3 Enter PIN +CPIN Table 62: +CPIN parameter command syntax Command +CPIN=[,] +CPIN +CPIN= Possible response(s) +CME ERROR: +CPIN: +CME ERROR: Description Set command sends to the MT a password which is necessary before it can be operated (SIM PIN, SIM PUK, PH-SIM PIN, etc.). If the PIN is to be entered twice, the TA shall automatically repeat the PIN. If no PIN request is pending, no action is taken towards MT and an error message, +CME ERROR, is returned to TE. Refer subclause 9.2 for possible values. NOTE 1: SIM PIN, SIM PUK, PH-SIM PIN, PH-FSIM PIN, PH-FSIM PUK, SIM PIN2 and SIM PUK2 refer to the PIN of the selected application on the UICC. For example, in an UTRAN context, the selected application on the currently selected UICC should be a USIM and the SIM PIN then represents the PIN of the selected USIM. See 3GPP TS 31.101 [65] for further details on application selection on the UICC. If the PIN required is SIM PUK or SIM PUK2, the second pin is required. This second pin, , is used to replace the old pin in the SIM. NOTE 2: Commands which interact with MT that are accepted when MT is pending SIM PIN, SIM PUK, or PH-SIM are: +CGMI, +CGMM, +CGMR, +CGSN, D112; (emergency call), +CPAS, +CFUN, +CPIN, +CPINR, +CDIS (read and test command only), and +CIND (read and test command only). Read command returns an alphanumeric string indicating whether some password is required or not. Defined values , : string type values values reserved by the present document: READY SIM PIN SIM PUK PH-SIM PIN MT is not pending for any password MT is waiting SIM PIN to be given MT is waiting SIM PUK to be given MT is waiting phone-to-SIM card password to be given ETSI
3GPP TS 27.007 version 11.8.0 Release 11 98 ETSI TS 127 007 V11.8.0 (2013-10) PH-FSIM PIN PH-FSIM PUK SIM PIN2 SIM PUK2 PH-NET PIN PH-NET PUK PH-NETSUB PIN PH-NETSUB PUK PH-SP PIN PH-SP PUK PH-CORP PIN PH-CORP PUK MT is waiting phone-to-very first SIM card password to be given MT is waiting phone-to-very first SIM card unblocking password to be given MT is waiting SIM PIN2 to be given (this is recommended to be returned only when the last executed command resulted in PIN2 authentication failure (i.e. +CME ERROR: 17); if PIN2 is not entered right after the failure, it is recommended that MT does not block its operation) MT is waiting SIM PUK2 to be given (this is recommended to be returned only when the last executed command resulted in PUK2 authentication failure (i.e. +CME ERROR: 18); if PUK2 and new PIN2 are not entered right after the failure, it is recommended that MT does not block its operation) MT is waiting network personalization password to be given MT is waiting network personalization unblocking password to be given MT is waiting network subset personalization password to be given MT is waiting network subset personalization unblocking password to be given MT is waiting service provider personalization password to be given MT is waiting service provider personalization unblocking password to be given MT is waiting corporate personalization password to be given MT is waiting corporate personalization unblocking password to be given Implementation Mandatory for MT not supporting the +CKPD command and supporting AT commands only. 8.4 Battery charge +CBC Table 63: +CBC action command syntax Command +CBC +CBC= Possible response(s) +CBC: , +CME ERROR: +CBC: (list of supported s),(list of supported s) Description Execution command returns battery connection status and battery charge level of the MT. Refer subclause 9.2 for possible values. Test command returns values supported as compound values. Defined values : integer type 0 MT is powered by the battery 1 MT has a battery connected, but is not powered by it 2 MT does not have a battery connected 3 Recognized power fault, calls inhibited ETSI
Page 1 and 2:
ETSI TS 127 007 V11.8.0 (2013-10) T
Page 3 and 4:
3GPP TS 27.007 version 11.8.0 Relea
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48: 3GPP TS 27.007 version 11.8.0 Relea
Page 97: 3GPP TS 27.007 version 11.8.0 Relea
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

ts_127007v110800p

Create successful ePaper yourself

Delete template?

Save as template?