ts_127007v110800p

Recommendations

Info

3GPP TS 27.007 version 11.8.0 Release 11 119 ETSI TS 127 007 V11.8.0 (2013-10) +CLVL +CLVL: +CLVL= +CME ERROR: +CLVL: (list of supported s) +CME ERROR: Description This command is used to select the volume of the internal loudspeaker of the MT. Refer subclause 9.2 for possible values. Test command returns supported values as compound value. Defined values : integer type value with manufacturer specific range (smallest value represents the lowest sound level) Implementation Optional. 8.24 Mute control +CMUT Table 84: +CMUT parameter command syntax Command +CMUT=[] +CMUT +CMUT= Possible response(s) +CME ERROR: +CMUT: +CME ERROR: +CMUT: (list of supported s) Description This command is used to enable and disable the uplink voice muting during a voice call. Refer subclause 9.2 for possible values. Read command returns the current value of . Test command returns supported values as compound value. Defined values : integer type 0 mute off 1 mute on Implementation Optional. ETSI
3GPP TS 27.007 version 11.8.0 Release 11 120 ETSI TS 127 007 V11.8.0 (2013-10) 8.25 Accumulated call meter +CACM Table 85: +CACM parameter command syntax Command +CACM=[] +CACM +CACM= Possible response(s) +CME ERROR: +CACM: +CME ERROR: Description Set command resets the Advice of Charge related accumulated call meter value in SIM card or in the active application in the UICC (GSM or USIM) file EF ACM . ACM contains the total number of home units for both the current and preceding calls. SIM PIN2 is usually required to reset the value. If setting fails in an MT error, +CME ERROR: is returned. Refer subclause 9.2 for values. Read command returns the current value of ACM. Defined values : string type; SIM PIN2 : string type; accumulated call meter value similarly coded as under +CAOC Implementation Optional. 8.26 Accumulated call meter maximum +CAMM Table 86: +CAMM parameter command syntax Command +CAMM=[[,]] +CAMM +CAMM= Possible response(s) +CME ERROR: +CAMM: +CME ERROR: Description Set command sets the Advice of Charge related accumulated call meter maximum value in SIM card or in the active application in the UICC (GSM or USIM) file EF ACMmax . ACMmax contains the maximum number of home units allowed to be consumed by the subscriber. When ACM (refer +CACM) reaches ACMmax calls are prohibited (see also 3GPP TS 22.024 [26]). SIM PIN2 is usually required to set the value. If setting fails in an MT error, +CME ERROR: is returned. Refer subclause 9.2 for values. Read command returns the current value of ACMmax. Defined values : string type; accumulated call meter maximum value similarly coded as under +CAOC; value zero disables ACMmax feature : string type; SIM PIN2 Implementation ETSI
Page 1 and 2:
ETSI TS 127 007 V11.8.0 (2013-10) T
Page 3 and 4:
3GPP TS 27.007 version 11.8.0 Relea
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70: 3GPP TS 27.007 version 11.8.0 Relea
Page 119: 3GPP TS 27.007 version 11.8.0 Relea
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

ts_127007v110800p

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?