ts_127007v110800p

3GPP TS 27.007 version 11.8.0 Release 11
22
ETSI TS 127 007 V11.8.0 (2013-10)
Text shall not contain the sequence 0 or OK
Implementation
Optional.
5.4 Request product serial number identification +CGSN
Table 5: +CGSN action command syntax
Command
+CGSN
+CGSN=
Possible response(s)
+CME ERROR:
Description
Execution command causes the TA to return one or more lines of information text , determined by the MT
manufacturer, which is intended to permit the user of the TA to identify the individual MT to which it is connected to.
Typically, the text will consist of a single line containing the IMEI (International Mobile station Equipment Identity;
refer 3GPP TS 23.003 [7]) number of the MT, but manufacturers may choose to provide more information if desired.
Refer subclause 9.2 for possible values.
Defined values
: the total number of characters, including line terminators, in the information text shall not exceed 2048
characters.
Text shall not contain the sequence 0 or OK
Implementation
Optional.
5.5 Select TE character set +CSCS
Table 6: +CSCS parameter command syntax
Command
+CSCS=[]
+CSCS
+CSCS=
Possible response(s)
+CSCS:
+CSCS: (list of supported s)
Description
Set command informs TA which character set is used by the TE. TA is then able to convert character strings
correctly between TE and MT character sets.
When TA-TE interface is set to 8-bit operation and used TE alphabet is 7-bit, the highest bit shall be set to zero.
NOTE:
It is manufacturer specific how the internal alphabet of MT is converted to/from the TE alphabet.
Read command shows current setting and test command displays conversion schemes implemented in the TA.
Defined values
: character set as a string type (conversion schemes not listed here can be defined by manufacturers)
ETSI