ts_127007v110800p

3GPP TS 27.007 version 11.8.0 Release 11
193
ETSI TS 127 007 V11.8.0 (2013-10)
AT+CPBS=
+CPBS: ("ME","SM")
(MT and SIM have phonebooks)
OK
AT+CPBS="ME"
(select MT memory)
OK
AT+CPBR=
(read index range and element lengths)
+CPBR: (1-99),30,30
OK
AT+CPBR=1,99
(read all entries but only the ones set are returned)
+CPBR: 1,"931123456",129,"Ilkka"
+CPBR: 2,"9501234567",129,""
+CPBR: 4,"901234567",129,"Hesari"
OK
AT+CPBW=4;+CPBW=3,"921123456",,"TS" (clear index 4 and write index 3)
OK
9 Mobile termination errors
9.1 Report mobile termination error +CMEE
Table 110: +CMEE parameter command syntax
Command
+CMEE=[]
+CMEE
+CMEE=
Possible response(s)
+CMEE:
+CMEE: (list of supported s)
Description
Set command disables or enables the use of final result code +CME ERROR: as an indication of an error
relating to the functionality of the MT. When enabled, MT related errors cause +CME ERROR: final result
code instead of the regular ERROR final result code. ERROR is returned normally when error is related to syntax, invalid
parameters, or TA functionality.
Test command returns values supported as a compound value.
Defined values
: integer type.
0 disable +CME ERROR: result code and use ERROR instead
1 enable +CME ERROR: result code and use numeric values (refer subclause 9.2)
2 enable +CME ERROR: result code and use verbose values (refer subclause 9.2)
Implementation
Mandatory for values 0 and 1.
9.1a Report mobile originated location request error +CMOLRE
Table 9.1a-1: +CMOLRE parameter command syntax
Command
+CMOLRE=[]
+CMOLRE
+CMOLRE=
Possible response(s)
+CMOLRE:
+CMOLRE: (list of supported s)
ETSI