ts_127007v110800p

Recommendations

Info

3GPP TS 27.007 version 11.8.0 Release 11 255 ETSI TS 127 007 V11.8.0 (2013-10) Defined values : integer type 0 return a list of all current running voice group and voice broadcast calls for which the user has a subscription and the GId is activated on the SIM 1 return the active voice group or voice broadcast call : a digit string that specifies the group identification of the voice group or voice broadcast call. : a digit string that specifies the group call area of the voice group or voice broadcast call. : integer type (tele-service) 17 voice group call 18 voice broadcast call : integer type (state of the call) 0 active, i.e. user participating at the call as talker or listener 1 held, the call is running but put to background, notifications ignored 2 incoming (MT call), the user doesn't respond to notifications of this call yet : integer type (direction of the call) 0 mobile originated (MO) call, the user is the originator of the call 1 mobile terminated (MT) call, the user is not the originator of the call : integer type; proposes that a predefined confirmation procedure is to be used after the call is ended 0 confirmation procedure is not required 1 confirmation procedure is required : integer type; identifies the priority level of the voice group or voice broadcast call. The values are specified in 3GPP TS 22.067 [54]. Implementation Optional. Recommended for an MT supporting AT commands only and VGCS or VBS is implemented. 11.1.7 Voice group or voice broadcast call state attribute presentation +CACSP Table 138: +CACSP parameter command syntax Command +CACSP=[] +CACSP +CACSP= Possible Response(s) +CME ERROR: +CACSP: [,,,,] +CME ERROR: +CACSP: (list of supported s) Description ETSI
3GPP TS 27.007 version 11.8.0 Release 11 256 ETSI TS 127 007 V11.8.0 (2013-10) The set command enables or disables the presentation of unsolicited result code +CACSP: ,,, from MT to TE if the call control state attributes of the active voice group or voice broadcast call changes. Read command returns the current call control state attributes , , , and selected . The test command returns values supported as a compound value. Defined Values : integer type; status of unsolicited result code presentation 0 disabled 1 enabled : integer type. User connection in the downlink 0 not attached 1 attached : integer type. User connection in the uplink 0 not attached 1 attached : integer type. The MT assumes that communication with i<strong>ts</strong> peer entity is 0 not enabled in both directions 1 enabled in both directions : integer type. The MT assumes to be 0 not the originator of the call 1 the originator of the call Implementation Optional. Recommended for a MT supporting AT commands only and VGCS or VBS is implemented. 11.1.8 NCH support indication +CANCHEV Table 139: +CANCHEV parameter command syntax Command +CANCHEV=[] +CANCHEV +CANCHEV= Possible Response(s) +CME ERROR: +CANCHEV: , +CME ERROR: +CANCHEV: (list of supported s) Description The set command enables or disables the presentation of unsolicited result code +CANCHEV: from MT to TE if the status of the network NCH support information changes. Read command returns in parameter the network NCH support information in the selected cell and the selected . ETSI
Page 1 and 2:
ETSI TS 127 007 V11.8.0 (2013-10) T
Page 3 and 4:
3GPP TS 27.007 version 11.8.0 Relea
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206: 3GPP TS 27.007 version 11.8.0 Relea
Page 255: 3GPP TS 27.007 version 11.8.0 Relea
show all

ts_127007v110800p

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?