ts_127007v110800p

3GPP TS 27.007 version 11.8.0 Release 11
173
ETSI TS 127 007 V11.8.0 (2013-10)
7 CS to PS SRVCC handover cancelled ("Handover Failure" sent).
8 CS to PS SRVCC handover, general non-specific failure.
9 CS to PS SRVCC handover successful ("Handover Complete" sent).
NOTE 1: Value 3 and 8, general non-specific failure, might be used e.g. in the case of handover cancellation as
specified in 3GPP TS 24.301 [83] subclause 6.6.2.
NOTE 2: The naming of SRVCC and vSRVCC handover information values is different from the naming of
corresponding NAS session management notifications.
Implementation
Optional.
8.65 Remaining PIN retries +CPINR
Table 8.65-1: +CPINR action command syntax
Command
+CPINR[=]
+CPINR=
Possible response(s)
+CME ERROR:
Description
Execution command cause the MT to return the number of remaining PIN retries for the MT passwords with
intermediate result code +CPINR: ,[,] for standard PINs and
+CPINRE: ,[,] for manufacturer specific PINs. One line with
one intermediate result code is returned for every or selected by .
When execution command is issued without the optional parameter , intermediate result codes are
returned for all s and s.
In the intermediate result codes, the parameter is an optional (manufacturer specific)
parameter, per and .
Defined values
: integer type. Number of remaining retries per PIN.
: integer type. Number of default/initial retries per PIN.
: Type of PIN. All values listed under the description of the AT+CPIN command, parameter,
except 'READY'.
: Extended, manufacturer specific codes.
: String type. Same values as for the and parameters. These values are
strings and shall be indicated within double quotes. It is optional to support wildcard match by '*', meaning
match any (sub-)string.
Example:
AT+CPINR="SIM*" will return the lines:
+CPINR: SIM PIN,,
+CPINR: SIM PUK,,
+CPINR: SIM PIN2,,
+CPINR: SIM PUK2,,
Example:
AT+CPINR="*SIM*" will additionally return the lines:
ETSI