ts_127007v110800p

3GPP TS 27.007 version 11.8.0 Release 11
291
ETSI TS 127 007 V11.8.0 (2013-10)
C.2.13 Transmit data state +VTX
This action command causes the TA to receive audio data from the computer and send it to a destination determined by
the +VLS command. Once the audio datastream has started, commands to the TA shall be embedded in the data stream,
and shielded using the normal methods. The transmit process is terminated by the use of embedded commands
or by the time-out of an inactivity timer. It is recommended that the TA has a buffer to allow the TA to convert
potentially bursty data from the computer into synchronous data for "transmission". The command is write only.
Table C.20: +VTX action command syntax
Command
+VTX
Return
CONNECT
ETSI