ts_127007v110800p

Recommendations

Info

3GPP TS 27.007 version 11.8.0 Release 11 77 ETSI TS 127 007 V11.8.0 (2013-10) 7.20 Selection of preferred PLMN list +CPLS Table 53:+CPLS parameter command syntax Command +CPLS=[] +CPLS +CPLS= Possible response(s) +CME ERROR: +CPLS: +CME ERROR: +CPLS: (list of supported s) +CME ERROR: Description This command is used to select one PLMN selector with Access Technology list in the SIM card or active application in the UICC (GSM or USIM), that is used by +CPOL command. Execute command selec<strong>ts</strong> a list in the SIM/USIM. Refer subclause 9.2 for possible values. Read command returns the selected PLMN selector list from the SIM/USIM Test command returns the whole index range supported lis<strong>ts</strong> by the SIM/USIM Defined values : integer type 0 User controlled PLMN selector with Access Technology EF PLMNwAcT , if not found in the SIM/UICC then PLMN preferred list EF PLMNsel (this file is only available in SIM card or GSM application selected in UICC) 1 Operator controlled PLMN selector with Access Technology EF OPLMNwAcT 2 HPLMN selector with Access Technology EF HPLMNwAcT Implementation Optional. 7.21 Read operator names +COPN Table 54:+COPN action command syntax Command +COPN +COPN= Possible response(s) +COPN: , [+COPN: , [...]] +CME ERROR: Description Execute command returns the list of operator names from the MT. Each operator code that has an alphanumeric equivalent in the MT memory shall be returned. Refer subclause 9.2 for possible values. Defined values : string type; operator in numeric format (see +COPS) ETSI
3GPP TS 27.007 version 11.8.0 Release 11 78 ETSI TS 127 007 V11.8.0 (2013-10) : string type; operator in long alphanumeric format (see +COPS) Implementation Optional. 7.22 eMLPP priority registration and interrogation +CAEMLPP Table 55: +CAEMLPP parameter command syntax Command +CAEMLPP= +CAEMLPP +CAEMLPP= Possible Response(s) +CME ERROR: +CAEMLPP: , +CME ERROR: Description The execute command is used to change the default priority level of the user in the network. The requested priority level is checked against the eMLPP subscription of the user stored on the SIM card or in the active application in the UICC (GSM or USIM) EF eMLPP . If the user doesn't have subscription for the requested priority level an ERROR or +CMEE ERROR result code is returned. The read command triggers an interrogation of the provision of the maximum priority level which the service subscriber is allowed to use and default priority level activated by the user. If the service is not provisioned, a result code including the SS-Status () parameter is returned. Defined Values : integer type parameter which identifies the default priority level to be activated in the network, values specified in 3GPP TS 22.067 [54] : integer type parameter which identifies the default priority level which is activated in the network, values specified in 3GPP TS 22.067 [54] : integer type parameter which identifies the maximum priority level for which the service subscriber has a subscription in the network, values specified in 3GPP TS 22.067 [54] Implementation Mandatory for a MT supporting AT commands only and supplemantery service eMLPP is implemented. 7.23 eMLPP subscriptions +CPPS Table 56: +CPPS action command syntax Description Command +CPPS +CPPS= Possible response(s) [+CPPS: [, [...]]] +CME ERROR: This command returns all eMLPP priority subscriptions of the user stored on the SIM card or in the active application in the UICC (GSM or USIM) EF eMLPP . If no explicit priority level subscription is stored on the SIM card or in the active application in the UICC (GSM or USIM) EF eMLPP the result code OK is returned. Defined values ETSI
Page 1 and 2:
ETSI TS 127 007 V11.8.0 (2013-10) T
Page 3 and 4:
3GPP TS 27.007 version 11.8.0 Relea
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28: 3GPP TS 27.007 version 11.8.0 Relea
Page 77: 3GPP TS 27.007 version 11.8.0 Relea
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

ts_127007v110800p

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?