ts_127007v110800p

3GPP TS 27.007 version 11.8.0 Release 11
76
ETSI TS 127 007 V11.8.0 (2013-10)
This command is used to edit the PLMN selector with Access Technology lists in the SIM card or active application in
the UICC (GSM or USIM).
Execute command writes an entry in the SIM/USIM list of preferred PLMNs, previously selected by the command
+CPLS. If no list has been previously selected, the User controlled PLMN selector with Access Technology,
EF PLMNwAcT, is the one accessed by default. If is given but is left out, entry is deleted. If is
given but is left out, is put in the next free location. If only is given, the format of the
in the read command is changed. The Access Technology selection parameters, ,
and and are required when writing User controlled
PLMN selector with Access Technology, EF PLMNwAcT , Operator controlled PLMN selector with Access Technology
EF OPLMNwAcT and HPLMN selector with Access Technology EF HPLMNwAcT , see 3GPP TS 31.102 [59]. Refer
subclause 9.2 for possible values.
NOTE 1: MT can also update the User controlled PLMN selector with Access Technology, EF PLMNwAcT ,
automatically when new networks are selected.
NOTE 2: The Operator controlled PLMN selector with Access Technology EF OPLMNwAcT , can only be written if the
write access condition in the SIM/USIM has been previously verified.
Read command returns all used entries from the SIM/USIM list of preferred PLMNs, previously selected by the
command +CPLS, with the Access Technologies for each PLMN in the list.
Test command returns the whole index range supported by the SIM.
Defined values
: integer type; the order number of operator in the SIM/USIM preferred operator list
: integer type
0 long format alphanumeric
1 short format alphanumeric
2 numeric
: string type; indicates if the format is alphanumeric or numeric (see +COPS)
: integer type; GSM access technology:
0 access technology not selected
1 access technology selected
: integer type; GSM compact access technology
0 access technology not selected
1 access technology selected
: integer type; UTRAN access technology
0 access technology not selected
1 access technology selected
: integer type; E-UTRAN access technology
0 access technology not selected
1 access technology selected
Implementation
Optional.
ETSI