ts_127007v110800p

Recommendations

Info

3GPP TS 27.007 version 11.8.0 Release 11 175 ETSI TS 127 007 V11.8.0 (2013-10) Description This command allows for reading and dynamical reporting of emergency numbers as received from the network. The emergency numbers are not necessarily received for the same and as currently registered to. Read command returns one line of intermediate result code +CEN1: , with the current setting and the Mobile Country Code . Then follows zero or more occurrences of the emergency numbers with intermediate result code +CEN2: ,. Set command enables reporting of new emergency numbers received from the network with unsolicited result codes equal to the intermediate result codes of the read form of the command. Test command returns values supported as compound values. Defined values : integer type. Enables and disables reporting of new emergency numbers received from the network. 0 Disable reporting 1 Enable reporting : integer type. A three-digit value indicating mobile country code as defined in ITU-T Recommendation E.212 [10] Annex A. : integer type. A three-digit value indicating the mobile network code. : integer type. A bitmap indicating the Emergency Service Category Value according to 3GPP TS 24.008 [8] table 10.5.135d. : String type. Representing an emergency number from the list defined in 3GPP TS 24.008 [8]subclause 10.5.3.13. The is encoded with one digit per character and is applicable to the country indicated by . Implementation Optional. 8.68 Availability for voice calls with IMS +CAVIMS Table 8.68-1: +CAVIMS parameter command syntax Command +CAVIMS=[] +CAVIMS +CAVIMS= Possible response(s) +CAVIMS: +CAVIMS: (list of supported s) Description Set command informs the MT whether the UE is currently available for voice calls with the IMS (see 3GPP TS 24.229 [89]). The information can be used by the MT to determine "IMS voice not available" as defined in 3GPP TS 24.301 [83], and for mobility management for IMS voice termination, see 3GPP TS 24.008 [20]. Read command returns the UEs IMS voice call availability status stored in the MT. Test command returns supported values. Defined values : integer type. The UEs IMS voice call availability status. ETSI
3GPP TS 27.007 version 11.8.0 Release 11 176 ETSI TS 127 007 V11.8.0 (2013-10) 0 Voice calls with the IMS are not available 1 Voice calls with the IMS are available Implementation Optional. 8.69 Extended signal quality +CESQ Table 8.69-1: +CESQ action command syntax Command +CESQ +CESQ= Possible response(s) +CESQ: ,,,,, +CME ERROR: +CESQ: (list of supported s),(list of supported s),(list of supported s),(list of supported s),(list of supported s),(list of supported s) Description Execution command returns received signal quality parameters. If the current serving cell is not a GERAN cell, and are set to value 99. If the current serving cell is not a UTRA FDD or UTRA TDD cell, is set to 255. If the current serving cell is not a UTRA FDD cell, is set to 255. If the current serving cell is not an E-UTRA cell, and are set to 255. Refer subclause 9.2 for possible values. Test command returns values supported as compound values. Defined values : integer type, received signal strength level (see 3GPP TS 45.008 [20] subclause 8.1.4). 0 rssi < -110 dBm 1 -110 dBm ≤ rssi < -109 dBm 2 -109 dBm ≤ rssi < -108 dBm : : : : 61 -50 dBm ≤ rssi < -49 dBm 62 -49 dBm ≤ rssi < -48 dBm 63 -48 dBm ≤ rssi 99 not known or not detectable : integer type; channel bit error rate (in percent) 0...7 as RXQUAL values in the table in 3GPP TS 45.008 [20] subclause 8.2.4 99 not known or not detectable : integer type, received signal code power (see 3GPP TS 25.133 [95] subclause 9.1.1.3 and 3GPP TS 25.123 [96] subclause 9.1.1.1.3). 0 rscp < -120 dBm 1 -120 dBm ≤ rscp < -119 dBm ETSI
Page 1 and 2:
ETSI TS 127 007 V11.8.0 (2013-10) T
Page 3 and 4:
3GPP TS 27.007 version 11.8.0 Relea
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126: 3GPP TS 27.007 version 11.8.0 Relea
Page 175: 3GPP TS 27.007 version 11.8.0 Relea
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

ts_127007v110800p

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?