ts_127007v110800p

3GPP TS 27.007 version 11.8.0 Release 11
46
ETSI TS 127 007 V11.8.0 (2013-10)
Optional.
6.20 Voice hangup control +CVHU
Table 27: +CVHU parameter command syntax
Command
+CVHU=[]
+CVHU
+CVHU=
Possible response(s)
+CVHU:
+CVHU: (list of supported s)
Description
Set command selects whether ATH or "drop DTR" shall cause a voice connection to be disconnected or not. By voice
connection is also meant alternating mode calls that are currently in voice mode. (See subclause 6.6).
NOTE:
When = 2, this command must be seen in conjunction with the
ITU-T Recommendation V.250 [14] command &D. Else &D shall be ignored.
Defined values
: integer type
0 "Drop DTR" ignored but OK response given. ATH disconnects.
1 "Drop DTR" and ATH ignored but OK response given.
2 "Drop DTR" behaviour according to &D setting. ATH disconnects.
Implementation
Optional
6.21 CCITT V.120 [36] rate adaption protocol +CV120
Command
+CV120=[[,[,[,[,[,
]]]]]]
+CV120
+CV120=
Table 28: +CV120 parameter command syntax
Possible response(s)
+CV120: ,,,,,
+CV120: (list of supported s),(list of supported
s),(list of supported s),(list of supported
s),(list of supported s),(list of
supported s)
Description
Set command sets the values of the V.120 protocol parameters (defined in CCITT Recommendation V.120 [36]) that
are carried in the GSM BC and/or LLC information elements.
Read command returns current settings for the V.120 parameters.
Test command returns values supported as a compound value.
Defined values
: integer type
ETSI