ts_127007v110800p

3GPP TS 27.007 version 11.8.0 Release 11
88
ETSI TS 127 007 V11.8.0 (2013-10)
0 0
1 4
2 8
3 16
4 32
5 64
6 128
7 256
8 512
integer type; parameter shows the barring timer for MMTEL video. is mapped to the
BarringTimeForMMTEL-Video as in table 7.32-5.
Table 7.32-5: Value of BTVideo and its interpretation by MMTEL application
BarringTimeForMMTEL-Video as
specified in 3GPP TS 24.173 [87]
0 0
1 4
2 8
3 16
4 32
5 64
6 128
7 256
8 512
Implementation
Optional.
This command is not applicable to UTRAN or GERAN UEs.
7.33 Network emergency bearer services support +CNEM
Table 7.33-1: +CNEM parameter command syntax
Command
+CNEM=[]
+CNEM
+CNEM=
Possible response(s)
+CME ERROR:
+CNEM: [,,]
+CNEM: (list of supported s)
Description
Set command enables reporting of changes in the emergency bearer services support indicators with the unsolicited
result code +CNEMIU: according to the network feature support information element, see
3GPP TS 24.008 [8] subclause 10.5.5.23 and the unsolicited result code +CNEMS1: according to
the EPS network feature support information element, see 3GPP TS 24.301 [83] subclause 9.9.3.12A. Refer
subclause 9.2 for possible values.
Read command returns current command setting and if enabled, the settings of the emergency bearer services support
indicator in Iu mode and the emergency bearer services support indicator in S1 mode for the network where the UE is
attached.
Test command returns values supported as a compound value.
Defined values
: integer type
ETSI