ts_127007v110800p

Recommendations

Info

3GPP TS 27.007 version 11.8.0 Release 11 145 ETSI TS 127 007 V11.8.0 (2013-10) User Action Syntax Description Depress AT+CTSA=1,25,45 This will emulate a user pressing down on the ME touch screen at the 25, 45 coordinates. Release AT+CTSA=0,25,45 This will emulate a user releasing the touch screen at the 25, 45 coordinates. Single Tap AT+CTSA=2,25,45 This will emulate a user single tapping the touch screen at the 25, 45 coordinates. Double Tap AT+CTSA=3,25,45 This will emulate a user double tapping the touch screen at the 25, 45 coordinates. Drag AT+CTSA=1,10,10; +CTSA=0,50,50 This will emulate a user touching at 10,10, dragging to 50,50, and releasing. Draw Multi Touch Long Depress AT+CTSA=1,10,10; +CTSA=1,50,50; +CTSA=0,100,100 AT+CTSA=1,10,10,0; +CTSA=1,50,50,1; +CTSA=0,60,60,1; +CTSA=0,100,100,0 AT+CTSA=1,10,10,0; +CTSA=0,10,10,0,3000 This will emulate a user touching at 10,10, then dragging to 50,50, then dragging to 100,100 and finally releasing the touch screen at 100,100. This will emulate a user initiating a first gesture touching at 10,10, then simultaneously initiating a second gesture at 50,50, then dragging the second gesture from 50, 50 to 60,60. The user releases the second gesture at 60. 60 while simultaneously dragging the first gesture from 10,10 to 100,100 and finally releasing the touch screen at 100,100. This will emulate a user touching at coordinates 10,10, and releasing the touch screen at coordinates 10, 10, after 3 seconds. Implementation Optional. 8.53 Command screen orientation +CSO Table 8.53-1: +CSO parameter command syntax Command Possible response(s) +CSO=[,] +CSO +CSO: [,] +CSO= +CME ERROR: +CSO: (list of supported s) +CME ERROR: Description ETSI
3GPP TS 27.007 version 11.8.0 Release 11 146 ETSI TS 127 007 V11.8.0 (2013-10) This command is used to set or read back the orientation of the screen on the mobile equipment (ME). The ME may override the setting via a key press or touch screen action. In addition to setting portrait mode and landscape mode, the command is used by the TE to set a reference orientation for the screen on the ME. The physical orientation of the ME shall not override this command. If emulation fails with an ME error, +CME ERROR: is returned. Refer subclause 9.2 for values. Figure 8.53-1: Labelled ME sides when the ME is in the normal operating mode This command should be accepted (OK returned) before actually performing the action. Test command returns the list of supported orientations for the mobile equipment. Defined values : integer type 0 Portrait. The device is in portrait mode. 1 Landscape. The device is in landscape mode. 2 Any. The top of the ME's screen is identified by parameter, identifying a side of the screen of the ME. : integer type, representing the label of the side that is the top of the screen. Examples: 0 Top. The ME is in the normal operating mode (see figure 8.53-1). 1 Right side. The side labelled right side is the side that is the top of the screen. 2 Bottom. The side labelled bottom is the side that is the top of the screen. 3 Left side. The side labelled left side is the side that is the top of the screen. Action Syntax Description Get Orientation AT+CSO This will return the current orientation of the screen device. Set Orientation AT+CSO=0 This will set the current orientation of the screen device to portrait. Set Orientation ALT+CSO=2,3 The right side is the current top side (e.g. the top can be determined relative to gravitational forces) and identifies the TE"s reference orientation for the screen on the device. Implementation Optional. ETSI
Page 1 and 2:
ETSI TS 127 007 V11.8.0 (2013-10) T
Page 3 and 4:
3GPP TS 27.007 version 11.8.0 Relea
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96: 3GPP TS 27.007 version 11.8.0 Relea
Page 145: 3GPP TS 27.007 version 11.8.0 Relea
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Page 209 and 210:
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Page 233 and 234:
Page 235 and 236:
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
Page 273 and 274:
Page 275 and 276:
Page 277 and 278:
Page 279 and 280:
Page 281 and 282:
Page 283 and 284:
Page 285 and 286:
Page 287 and 288:
Page 289 and 290:
Page 291 and 292:
Page 293 and 294:
Page 295 and 296:
Page 297 and 298:
Page 299 and 300:
Page 301 and 302:
show all

ts_127007v110800p

Create successful ePaper yourself

Delete template?

Save as template?