07.01.2015 Views

ts_127007v110800p

ts_127007v110800p

ts_127007v110800p

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

3GPP TS 27.007 version 11.8.0 Release 11<br />

59<br />

ETSI TS 127 007 V11.8.0 (2013-10)<br />

7.5 Change password +CPWD<br />

Table 38: +CPWD action command syntax<br />

Command<br />

Possible response(s)<br />

+CPWD=,, +CME ERROR: <br />

+CPWD=<br />

+CPWD: list of supported (,)s<br />

+CME ERROR: <br />

Description<br />

Action command se<strong>ts</strong> a new password for the facility lock function defined by command Facility Lock +CLCK. Refer<br />

subclause 9.2 for possible values.<br />

Test command returns a list of pairs which present the available facilities and the maximum length of their password.<br />

Defined values<br />

:<br />

"P2" SIM PIN2<br />

refer Facility Lock +CLCK for other values<br />

, : string type; shall be the same as password specified for the facility from the<br />

MT user interface or with command Change Password +CPWD and is the new password; maximum<br />

length of password can be determined with <br />

: integer type maximum length of the password for the facility<br />

Implementation<br />

Optional.<br />

7.6 Calling line identification presentation +CLIP<br />

Table 39: +CLIP parameter command syntax<br />

Command<br />

+CLIP=[]<br />

+CLIP<br />

+CLIP=<br />

Possible response(s)<br />

+CLIP: ,<br />

+CLIP: (list of supported s)<br />

Description<br />

This command refers to the supplementary service CLIP (Calling Line Identification Presentation) according to<br />

3GPP TS 22.081 [3] and OIP (Originating Identification Presentation) according to 3GPP TS 24.607 [119] that enables<br />

a called subscriber to get the calling line identity (CLI) of the calling party when receiving a mobile terminated call. Set<br />

command enables or disables the presentation of the CLI at the TE. It has no effect on the execution of the<br />

supplementary service CLIP / OIP in the network.<br />

When =1, the presentation of the calling line identity at the TE is enabled and when the calling subscriber allows,<br />

the unsolicited result code<br />

+CLIP: ,[,,[,[][,]]] is returned<br />

after every RING (or +CRING: ; refer subclause "Cellular result codes +CRC") result code sent from TA to<br />

TE. It is manufacturer specific if this response is used when normal voice call is answered. The unsolicited result code<br />

+CLIP does not support numbers of the SIP URI format.<br />

ETSI

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!