Series 04 Ku-Band TVRO Antenna

Series 04 Ku-Band TVRO Antenna
Troubleshooting and Maintenance
10. Install replacement Level Cage
Motor assembly into El Pan with
belt around sprocket and loosely
secure with hardware removed
in step 9.
11. Re-Install right El pan and secure
using Loctite 222 and all
hardware removed in steps 1, 2,
3, 5 and 6.
12. Plug the level cage cable into the
D-sub connector on the Level
Cage Assembly and tighten the
retaining screws using 2mm flat
blade screwdriver.
13. Tension belt by sliding Motor
sprocket assembly by hand away
from level cage and tighten the
four 4/40 screws with Loctite
222.
7-23