Series 04 Ku-Band TVRO Antenna
Series 04 Ku-Band TVRO Antenna
Series 04 Ku-Band TVRO Antenna
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Troubleshooting and Maintenance<br />
<strong>Series</strong> <strong>04</strong> <strong>Ku</strong>-<strong>Band</strong> <strong>TVRO</strong> <strong>Antenna</strong><br />
6. If not broken, remove the old<br />
belt from AZ driven sprocket<br />
and AZ motor sprocket.<br />
7. Place replacement belt around<br />
Azimuth motor sprocket, with<br />
interface harness and RF cables<br />
through the center of the belt.<br />
8. Place the belt don onto the<br />
teeth of the Azimuth driven<br />
sprocket.<br />
9. Tension belt by pulling motor<br />
assembly away from Azimuth<br />
driven sprocket and secure<br />
motor to bracket using Loctite<br />
222 and hardware loosened in<br />
step 5.<br />
7-28
![NC1147 (pdf 1.47 mb) Nitrogen Concentrator [OBIGGS] - Cobham plc](https://img.yumpu.com/51124104/1/190x245/nc1147-pdf-147-mb-nitrogen-concentrator-obiggs-cobham-plc.jpg?quality=85)
Change language