Series 04 Ku-Band TVRO Antenna

Troubleshooting and Maintenance
Series 04 Ku-Band TVRO Antenna
NOTE: Unless otherwise indicated, all nuts and bolts should be
assembled with Loctite 222 or its equivalent.
1. Loosen four Allen Head Screws
securing CL Motor Bracket to AZ
Post. Complete removal of
hardware is not required for belt
removal.
2. Cut the two Tie Wraps securing
old CL belt to Pulley.
3. Remove CL Belt from Pulley and
CL motor sprocket.
4. Install replacement belt around
CL motor sprocket and then
around CL pulley.
7-36