Series 04 Ku-Band TVRO Antenna
Series 04 Ku-Band TVRO Antenna
Series 04 Ku-Band TVRO Antenna
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Series</strong> <strong>04</strong> <strong>Ku</strong>-<strong>Band</strong> <strong>TVRO</strong> <strong>Antenna</strong><br />
Troubleshooting and Maintenance<br />
Step 13: In the ACU setup menu, go to<br />
Pol Type parameter and set antenna<br />
back to Auto Pol Mode:<br />
10. Briefly release and then push<br />
and release both<br />
LEFT & RIGHT arrow keys<br />
again. The ‘SAVE NEW<br />
PARAMETERS’ window should<br />
now be displayed.<br />
16. Push the ‘UP’ arrow key a<br />
few times until the until the ‘Pol<br />
Type’ parameter is displayed.<br />
17. Use the LEFT &<br />
RIGHT arrow keys to display a<br />
cursor under appropriate Pol<br />
value digits then use the ‘UP<br />
& DOWN’ arrow keys to change<br />
value. Then Press<br />
‘ENTER’ key. For Auto<br />
Polarization Mode set to Pol<br />
Type to 72. (To put antenna<br />
into Manual Polarization Mode<br />
set Pol Type to 9)<br />
7.4.15. Removing & Replacing the Feed Tube<br />
<strong>Series</strong> <strong>04</strong> Vertex Feed Tube replacement procedure<br />
Tools Required:<br />
• ¼” Open Ended Wrench<br />
• 5/64”, 7/64”, and 5/32” Allen Head Wrench<br />
• Snips/ Cutters<br />
• Loctite 222 or equiv.<br />
NOTE: Unless otherwise indicated, all nuts and bolts should be<br />
assembled with Loctite 222 or its equivalent.<br />
7-51