Series 04 Ku-Band TVRO Antenna

Troubleshooting and Maintenance
Series 04 Ku-Band TVRO Antenna
NOTE: Unless otherwise indicated, all nuts and bolts should be
assembled with Loctite 222 or its equivalent.
1. Using the ½” wrench, remove
the 5/16-18 x ½” bolt securing
inside EL Pan bottom to Spindle
Plate.
2. Remove the three 10/32 x 3/8”
screws attaching El Pan Cover to
the Polang Relay Assembly.
3. Rotate Level Cage clockwise as
required to access this 10/32 x
3/8” screw and remove.
4. Removing the Level cage
assembly and or belt is not
required.
7-38