Series 04 Ku-Band TVRO Antenna
Series 04 Ku-Band TVRO Antenna
Series 04 Ku-Band TVRO Antenna
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Series</strong> <strong>04</strong> <strong>Ku</strong>-<strong>Band</strong> <strong>TVRO</strong> <strong>Antenna</strong><br />
Troubleshooting and Maintenance<br />
3. Using a 2mm Flat blade<br />
screwdriver loosen retaining<br />
screws securing both D-Sub<br />
connectors to AZ Post<br />
Connector Panel and remove.<br />
4. Using snips, cut the Tie Wrap<br />
holding AZ Motor Wire harness<br />
and Pedestal Interface Harness<br />
together.<br />
5. Using a 9/64” Allen Wrench,<br />
loosen the four Allen head<br />
screws (bottom side of the<br />
motor bracket) securing AZ<br />
motor and slide the motor in<br />
toward the Azimuth driven<br />
sprocket (complete removal of<br />
hardware is not required).<br />
7-27