Series 04 Ku-Band TVRO Antenna
Series 04 Ku-Band TVRO Antenna
Series 04 Ku-Band TVRO Antenna
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Troubleshooting and Maintenance<br />
<strong>Series</strong> <strong>04</strong> <strong>Ku</strong>-<strong>Band</strong> <strong>TVRO</strong> <strong>Antenna</strong><br />
1. Using a 5/32” Allen Wrench,<br />
remove the two Allen Head<br />
screws which are farthest from<br />
the reflector (top and bottom)<br />
to enable you to swivel the<br />
elevation motor forward Toward<br />
the reflector. Loosen the two<br />
forward screws.<br />
2. Using Snips, cut tie wrap(s)<br />
securing spare elevation belt to<br />
CL beam. Use caution as to not<br />
cut belt.<br />
3. Install replacement belt around<br />
the elevation driven sprocket<br />
and elevation motor sprocket.<br />
4. Swivel the elevation motor<br />
bracket to CL beam (away from<br />
the reflector) and re-install the<br />
two screws removed in step 1.<br />
Using Loctite 222 tighten all<br />
four screws removed/loosened<br />
in step 1.<br />
7-32