ICMCTF 2012! - CD-Lab Application Oriented Coating Development

Thursday, April 26, 2012, 12:15 – 1:15 pm Royal Palm 1-3
Elsevier Authors Workshop: How to get published
Presented by Jan Willem Wijnen
Elsevier is the world’s leading publisher of science and health information and publishes a number of journals that
are highly relevant for ICMCTF attendees, such as “Thin Solid Films”, “Surface and Coatings Technology” and
“Vacuum.”
Publisher of these journals, Jan Willem Wijnen, will present a workshop that will provide insight into the
publishing process and explain the fundamental components and guidelines that authors should adhere to in preparing
manuscripts and submitting them to scientific journals for publication. The workshop will cover each step of the
submission, review, and revision processes; attendees will hear the Do’s and Don’ts of getting published.
Selected editors will attend and present their perspectives on what they consider to be the basic elements of top
quality articles that are published in their respective journals.
The workshop is aimed at new authors, but also at more experienced authors who want to hear how to bypass
common publishing hurdles or discuss with the editors.
Please visit the Elsevier Booth #210 in the Exhibition Hall.
Thursday, April 26, 2012, 4:10 – 5:10 pm Pacific Salon 1-2
Vacuum and Applications for Thin Film Coating Systems
Sang Hyun Park
Oerlikon Leybold Vacuum
There are many different types of material-controlling techniques such as PVD, sputtering, CVD, etch, etc in modern
industry. One of the most important things with these techniques is the vacuum that controls the environment for
material transfer and changes in isolated systems. The vacuum created by different types of vacuum pumps has
been used in these technologies thanks to several advantages over competing techniques where the vacuum is not
required to control the environment-such as printing technology. Regardless of whether coating systems will be
built by users themselves or purchased from commercial system makers, the proper selection of vacuum and pumps
along with application requirements will be the first step of system design.
(continued)
xii