ICMCTF 2012! - CD-Lab Application Oriented Coating Development

Tribology & Mechanical Behavior of Coatings and
Engineered Surfaces
Room: Tiki Pavilion - Session E2-1
Mechanical Properties and Adhesion
Moderators: M.T. Lin, National Chung Hsing University, Taiwan, D.
Bahr, Washington State University, US, R. Chromik, McGill University,
Canada, W. Clegg, University of Cambridge, UK
8:00 am E2-1-1
Strain hardening behavior in multilayer thin films, D. BAHR, RL.
SCHOEPPNER, S. LAWRENCE, I. MASTORAKOS, H. ZBIB, Washington State University,
US
8:20 am E2-1-2
Adhesion of tetrahedral amorphous carbon (ta-C) coatings deposited on
different substrates: Simulations and experimental verification, N.
BIERWISCH, Saxonian Institute of Surface Mechanics, Germany, G. FAVARO, CSM
Instruments SA, Switzerland, J. RAMM, OC Oerlikon Balzers AG, Liechtenstein, N.
SCHWARZER, Saxonian Institute of Surface Mechanics, Germany, M. SOBIECH, B.
WIDRIG, OC Oerlikon Balzers AG, Liechtenstein
8:40 am E2-1-3 Invited
Analysis on the stress transfer and the interfacial strength of carbon
coatings on metallic substrate using in-situ tensile and nanobending
experiments in SEM and Raman spectroscopy., K. DURST, University
Erlangen-Nuernberg, Germany
TS-25
Tribology & Mechanical Behavior of Coatings and
Engineered Surfaces
Room: Pacific Salon 1-2 - Session E4-2/G4-2
Coatings for Machining Advanced Materials and for use in
Advanced Manufacturing Methods
Moderators: M. Arndt, OC Oerlikon Balzers AG, Liechtenstein, X. Nie,
University of Windsor, Canada
E4-2/G4-2-1
New Coating Systems for Temperature Monitoring in Turning Processes,
M. KIRSCHNER, K. PANTKE, D. BIERMANN, Institute of Machining Technology, Germany,
J. HERPER, W. TILLMANN, Institute of Materials Engineering, Germany
E4-2/G4-2-2
Hybrid TiSiN, CrCx/a-C:H PVD Coatings Applied to Cutting Tools, W.
HENDERER, F. XU, Kennametal Incorporated, US
E4-2/G4-2-3
Effect of the Cutting Edge Entry Impact Duration on the Coated Tool’s
Wear in Down and Up Milling, K.-D. BOUZAKIS, Aristoteles University of
Thessaloniki; Fraunhofer Project Center Coating in Manufacturing, Greece, G.
KATIRTZOGLOU, E. BOUZAKIS, S. MAKRIMALLAKIS, G. MALIARIS, Aristoteles University
of Thessaloniki; Fraunhofer Project Center Coatings in Manufacturing, Greece
9:00 am Invited talk continued. E4-2/G4-2-4
Cutting performance of PVD coatings during dry drilling of sustainable
austempered ductile iron (ADI), A. MEENA, M. EL MANSORI, Arts et Métiers
ParisTech, France
9:20 am E2-1-5
Study of adhesion and cracking of TiO2 coatings on a Ti alloy using an
impact-sliding testing instrument, X. NIE, University of Windsor, Canada
9:40 am E2-1-6
Influence of oxide film properties on the adhesion performance of epoxycoated
aluminium, Ö ÖZKANAT, Delft University of Technology, Netherlands; Materials
innovation institute (M2i), Netherlands, J.M.C. MOL, J.H.W. DE WIT, Delft University of
Technology, Netherlands, H. TERRYN, Vrije Universiteit Brussel, Materials innovation
institute (M2i), Belgium
10:00 am E2-1-7
Adhesion and fatigue properties of TiB2-MoS2 composite coatings
deposited by closed-field unbalanced magnetron sputtering, F.B. BIDEV, Ö.
BARAN, E. ARSLAN, Y. TOTIK, İ. EFEOGLU, Ataturk University, Turkey
10:20 am E2-1-8
Coating thickness and interlayer effects on CVD-diamond film adhesion
to cobalt-cemented tungsten carbides, P. LU, The University of Alabama, US, H.
GOMEZ, University of South Florida, US, X. XIAO, M.J. LUKITSCH, A. SACHDEV, General
Motors, US, D. DURHAM, A. KUMAR, University of South Florida, US, K. CHOU, The
University of Alabama, US
10:40 am E2-1-9
On the effect of pressure induced change of Young's modulus, hardness
and yield strength, N. SCHWARZER, Saxonian Institute of Surface Mechanics,
Germany
11:00 am E2-1-10 Invited
A review of claims for ultra hardness in nanocomposite coatings, A.
FISCHER-CRIPPS, Fischer-Cripps Laboratories Pty Ltd, Australia
11:20 am Invited talk continued.
11:40 am
Thursday Morning, April 26, 2012
ELSEVIER FTS:
How to Get Published
Royal Palm 1-3 12:15 – 1:15 pm
E4-2/G4-2-5 Invited
Process design for the machining of high-strength steels, F. FELDERHOFF,
Robert Bosch GmbH, Germany
Invited talk continued.
E4-2/G4-2-7
A nanostructured cutting edge, J. RECHBERGER, J. MAUSHART, Fraisa SA,
Switzerland
E4-2/G4-2-9
Application of thick PVD coating deposited by new AIP cathode SFC for
machining of automotive component, K. YAMAMOTO, S. TANIFUJI, Kobe Steel
Ltd., Japan, G. FOX-RABINOVICH, McMaster University, Canada
E4-2/G4-2-10
Evaluation of the Abrasive Wear Resistance of Nitride, Oxynitride and
Oxide PVD Coatings at High Temperatures, P. DESSARZIN, P. KARVANKOVA,
M. MORSTEIN, Platit AG, Switzerland, J. NOHAVA, CSM Instruments SA, Switzerland
E4-2/G4-2-11
Application-oriented coating and post-treatment for high performance
broad band drilling operations, T. MICHALKE, Oerlikon Balzers Germany GmbH,
Germany, S. STEIN, M. ARNDT, OC Oerlikon Balzers AG, Liechtenstein
2013 ICMCTF Planning Meeting
Pacific Salon 1-2 12:00 – 1:15 pm
All interested attendees are welcome