ICMCTF 2012! - CD-Lab Application Oriented Coating Development

Coatings for Use at High Temperature
Room: Sunrise - Session A1-1
Coatings to Resist High Temperature Oxidation, Corrosion
and Fouling
Moderators: D. Naumenko, Forschungszentrum Jülich GmbH,
Germany, L-G. Johansson, Chalmers University of Technology,
Sweden, B. Hazel, Pratt and Whitney, US, J. Pérez, Universidad
Complutense de Madrid, Spain
8:00 am A1-1-1 Invited
Hot corrosion of NiAl diffusion coatings by gaseous Na2SO4, K. STILLER, H.
LAI, P. KNUTSSON, L-G. JOHANSSON, Chalmers University of Technology, Sweden
8:20 am Invited talk continued. Invited talk continued.
8:40 am A1-1-3
Early Stages during Exposure of Uncoated and Coated HK40 Steel to
Carburizing Atmospheres, D. MELO-MÁXIMO, TRAMES, S.A de C.V, Mexico, O.
SALAS, J. OSEGUERA, Instituto Tecnológico y de Estudios Superiores de Monterrey-CEM,
Mexico, R. REICHELT, Institut fuer Medizinische Physik und Biophysik Westfaelische
Wilhelms-Universitaet, Germany
9:00 am A1-1-4
New results and improvements of the catalytical poisoning concept
against metal dusting, C. GEERS, M. GALETZ, M. SCHÜTZE, Dechema e.V.,
Frankfurt am Main, Germany
9:20 am A1-1-5
Structural Evolution of Candidate Coatings for Protection against
Corrosion at High Temperature, L. MELO, Insttituto Politécnico Nacional, Mexico, O.
SALAS, J. OSEGUERA, Instituto Tecnológico y de Estudios Superiores de Monterrey-CEM,
Mexico, V. LOPEZ-HIRATA, Iinstituto Politecnico Nacional, Mexico, R. TORRES, Pontificia
Universidade Católica do Paraná, Brazil, R.M. SOUZA, Universidade Federal de Sao Paulo,
Brazil
9:40 am A1-1-6 Invited
Fundamental Approaches to Optimizing the Hot-Corrosion Resistance of
Coatings, B. GLEESON, University of Pittsburgh, US, Z. TANG, Iowa State University, US
TS-17
Hard Coatings and Vapor Deposition Technology
Room: Royal Palm 4-6 - Session B4-2
Properties and Characterization of Hard Coatings and
Surfaces
Moderators: J. Lin, Colorado School of Mines, US, C. Mulligan, U.S.
Army ARDEC, Benet Laboratories, US, B. Zhao, Exxon Mobile, US
B4-2-1 Invited
Design and plasma synthesis of tribological surfaces for titanium, A.
LEYLAND, University of Sheffield, UK, G. CASSAR, University of Sheffield, UK; University of
Malta, Malta, A. MATTHEWS, University of Sheffield, UK
B4-2-3
Study of the environment effect on the tribological behavior of TiN, TiAlN
and CrN coatings deposited by Reactive Magnetron Sputtering, J.S.
RESTREPO, S. MUHL, Universidad Nacional Autónoma de México - Instituto de
Investigaciones en Materiales, Mexico, M.F. CANO, F. SEQUEDA, J.M. GONZALEZ,
Universidad Del Valle, Colombia
B4-2-4
Wear behaviour of plasma sprayed Cu-Ni coatings on Al7075, M.J.
GHAZALI, Universiti Kebangsaan, Malaysia, E. MAT KAMAL, Universiti Teknika,l Malaysia,
S. ABDULLAH, J. SHENG, Universiti Kebangsaan, Malaysia
B4-2-6
Abrasive wear properties of AlCrN, AlTiN and CrN coatings, J.L.M. MO,
M.H. ZHU, Southwest Jiaotong University, China, A. LEYLAND, A. MATTHEWS, University
of Sheffield, UK
B4-2-7
Annealing-induced structural and mechanical property changes of CVD-
(Si)-B-C coatings, C. PALLIER, G. CHOLLON, P. WEISBECKER, F. TEYSSANDIER,
LCTS-CNRS, France
10:00 am Invited talk continued. B4-2-8
Thermal evolution of thermal, electrical and optical properties of Ti-Al-N
coatings, R. RACHBAUER, OC Oerlikon Balzers AG, Liechtenstein, J.J. GENGLER, Air
Force Research Laboratory, Thermal Sciences and Materials Branch, US, A. VOEVODIN, Air
Force Research Laboratory, US, K. RESCH, Materials Science and Testing of Plastics,
Montanuniversitaet Leoben, Austria, P.H. MAYRHOFER, Montanuniversität Leoben, Austria
10:20 am A1-1-8
High temperature oxidation studies of Detonation–Gun sprayed
NiCrAlY+0.4wt%CeO2 coating on Fe and Ni -Based Superalloys in air
under cyclic condition at 900 o C, S. KAMAL, Sharda University, India, D. MUDGAL,
R. JAYAGANTHAN, S. PRAKASH, I.I.T-Roorkee, India
10:40 am A1-1-9
High temperature oxidation studies o f D‐gun sprayed Cr 3 C 2
‐25(NiCr) and C r 3 C 2 ‐ 2 5 ( NiCr) + 0.2wt%Zr coatings o n Ni and Co
based superall o ys in air at 90 0 ˚C, D. MUDGAL, Indian Institute of Technology
Roorkee, India, S. KAMAL, Sharda University, India, S. SINGH, S. PRAKASH, Indian
Institute of Technology Roorkee, India
11:00 am A1-1-10
Oxidation behavior of Hf-modified aluminide coatings on Haynes-188 at
1050°C, Y. WANG, M. SUNESON, SIFCO Minneapolis, US
B4-2-9
Pressure and Temperature Effects on the Decomposition of Arc
Evaporated Ti1-xAlxN Coatings During Metal Machining, N. NORRBY, M.
JOHANSSON, Linköping University, Sweden, R. M'SAOUBI, Seco Tools AB., Sweden, M.
ODÉN, Linköping University, Sweden
B4-2-10
Understanding the deformation kinetics of Ti1-xAlxN ceramics at
moderately elevated temperatures, C. CIUREA, V. BHAKHRI, N. NI, Imperial
College London - South Kensington Campus, UK, P.H. MAYRHOFER, Montanuniversität
Leoben, Austria, F. GIULIANI, Imperial College London - South Kensington Campus, UK
B4-2-11
The Influence of Bias Voltage on Residual Stresses and Tribological
Behavior of Ti/TiAlN and Cr/CrAlN Multilayer Systems, W. TILLMANN, T.
SPRUTE, F. HOFFMANN, Technische Universität Dortmund, Germany
11:20 am B4-2-12
The effect of Yttrium addition on TiAlN coating, L. ZHU, M. HU, Shanghai
University, China, W. NI, Y. LIU, Kennametal Incorporated, US
11:40 am
Wednesday Morning, April 25, 2012
Exhibition Closes today at 2:00 pm