Thursday Afternoon Poster Sessions <strong>Coating</strong>s for Use at High Temperature Room: Golden Ballroom - Session AP Symposium A Poster Session 5:00 pm AP-1 Contact Corrosion propriety between Carbon Fiber Reinforced Composite Materials and Typical Metal alloys in an aggressive environment, Z.J. PENG, University of Windsor, Canada, Z.J. WANG, Univeristy of Windsor, Canada, X. NIE, University of Windsor, Canada AP-2 Influence of native oxide scales on the mechanical properties of polycrystalline nickel substrates, M. TATAT, P. GADAUD, C. COUPEAU, X. MILHET, Institut P’, CNRS – ENSMA - Université de Poitiers – UPR 3346, France, P. RENAULT, Institut P' - Universite de Poitiers, France, J. BALMAIN, <strong>Lab</strong>oratoire d’Etude des Matériaux en Milieux Agressifs - Université de La Rochelle, France AP-3 Evaluation of galvanic and corrosion behaviour of some commercial aluminium-based coatings deposited by various methods, O. FASUBA, A. YEROKHIN, A. MATTHEWS, A. LEYLAND, University of Sheffield, UK AP-4 High Temperature Diffusion Barriers for InSb based IR Detector, A. LE PRIOL, E. LE BOURHIS, P. RENAULT, Institut P' - Universite de Poitiers, France, H. SIK, P. MULLER, SAGEM Défense Sécurité, France AP-5 Improvement on the mechanical and corrosion properties of nanometric HfN/VN superlattices, P. PRIETO, Excellence Center for Novel Materials, CENM, Colombia, C. ESCOBAR, J CAICEDO, Thin Film Group, Universidad del Valle, Colombia, W. APERADOR, Ingeniería Mecatrónica, Universidad Militar Nueva Granada, Colombia, J. ESTEVE, Universitat de Barcelona, Spain, M. GÓMEZ, Thin Film Group, Universidad del Valle, Colombia AP-6 Study of the effect of densification on the mechanical properties of porous coatings after nano-indentation, X.J. LU, P. XIAO, H. LI, A. FOK, The University of Manchester, UK AP-8 Oxygen incorporation in Cr2AlC, M. TO BABEN, L. SHANG, J. EMMERLICH, J. SCHNEIDER, Materials Chemistry, RWTH Aachen university, Germany AP-9 Multicomponent <strong>Coating</strong>s in Cr-Al-Si-B-(N) System Produced by Magnetron Sputtering of Composite SHS-Targets, P. KIRYUKHANTSEV-KORNEEV, YU. POGOZHEV, D.V. SHTANSKY, National University of Science and Technology “MISIS”, Russian Federation, J. VLCEK, University of West Bohemia, Czech Republic, E.A. LEVASHOV, National University of Science and Technology “MISIS”, Russian Federation AP-10 Performance of Advanced Turbocharger Alloys and <strong>Coating</strong>s at 850-950oC in Air with Water Vapor, J. HAYNES, B. ARMSTRONG, B. PINT, Oak Ridge National <strong>Lab</strong>oratory, US AP-11 Oxidation Behavior of Ni-Ru Films under Glass Hot Pressing, C.K. CHANG, K.Y. LIU, Y.C. HSIAO, F.B. WU, National United University, Taiwan AP-12 Wear characteristics of Zr-Al-Ni based PVD nanocomposite thin films deposited on non-ferrous alloy substrates, J. LAWAL, A. MATTHEWS, A. LEYLAND, University of Sheffield, UK AP-13 The microstructure, mechanical properties and oxidation resistance of CrAlSiN coatings, Y.C. KUO, National Taiwan University of Science and Technology, Taiwan, J.W. LEE, C.J. WANG, Ming Chi University of Technology, Taiwan AP-14 Improvement of interface adhesion and thermal stability in thermal barrier coatings through plasma heat treatment, S. MYOUNG, J. JANG, K. LEE, Z. LU, Y. JUNG, J. LEE, Changwon National University, Republic of Korea, U. PAIK, Hanyang University, Republic of Korea <strong>Coating</strong>s for Use at High Temperature Room: Golden Ballroom - Session AP Symposium A Poster Session 5:00 pm AP-15 On Machining of Hardened AISI D2 Steel with Coated Tools, W. MATTES, C. VIANA, Brazil AP-16 Microstructure characterization of diffusion aluminide coatings obtained by gas phase aluminizing on direct solidification Ni base superalloys Rene 142 and Rene 108, B.W. WITALA, L.S. SWADZBA, Silesian University of Technology, Poland, L.K. KOMENDERA, AVIO Polska Sp. z o.o., Poland, M.H. HETMANCZYK, B.M. MENDALA, R. SWADZBA, G.M. MOSKAL, Silesian University of Technology, Poland AP-17 Degradation and thickness evaluation of thermal barrier coatings using nondestructive 3D scanning method, G.M. MOSKAL, R. SWADZBA, L.S. SWADZBA, M.H. HETMANCZYK, B.M. MENDALA, B.W. WITALA, Silesian University of Technology, Poland TS-30
Thursday Afternoon Poster Sessions Hard <strong>Coating</strong>s and Vapor Deposition Technology Room: Golden Ballroom - Session BP Symposium B Poster Session 5:00 pm BP-1 Trends in elasticity of binary and ternary transition metal aluminium nitrides, P. WAGNER, Montanuniversität Leoben, Austria, M. FRIÁK, Max-Planck-Institut for Iron Research, Germany, P.H. MAYRHOFER, D. HOLEC, Montanuniversität Leoben, Austria BP-2 Investigation of the mechanical properties of ternary metal nitrides TMxMo1-xN and TMxW1-xN with TM=Ti, Zr, V, Nb, Ta and Cr, K. BOUAMAMA, Ferhat Abbas University, Algeria, P. DJEMIA, D. FAURIE, University Paris 13, France, G. ABADIAS, Institut P' - Universite de Poitiers, France BP-3 Structural and elastic properties of ternary metal nitrides TixTa1-xN alloys: firstprinciples calculations versus experiments, M. BENHAMIDA, <strong>Lab</strong>oratoire Optoélectronique et Composants, Ferhat Abbas University, Algeria, K. BOUAMAMA, Ferhat Abbas University, Algeria, P. DJEMIA, University Paris 13, France, L. BELLIARD, UPMC, France, D. FAURIE, University Paris 13, France, G. ABADIAS, Institut P' - Universite de Poitiers, France BP-4 Growth of Zirconium Oxide by Heat Treatment of Zirconium Nitride Film under Controlled Atmosphere and Vacuum, J.W. SHINE, G.P. YU, J.H. HUANG, National Tsing Hua University, Taiwan BP-5 Microstructure and Characterization of Sputtered Ni-based Films Codeposited with Ru and P, K.Y. LIU, Y.C. HSIAO, C.K. CHANG, F.B. WU, National United University, Taiwan BP-7 Optimizing the PVD TiN thin film coating's parameters on AL 7075-T6 alloy for higher coating adhesion and better surface quality, E. ZALNEZHAD, University of Malaya, Malaysia BP-8 Analysis of damaging phenomena of coated cutting tools using hardened die steels, K. MORISHITA, Hitachi Tool Engineering, Ltd., Japan BP-9 Annealing effects on nanostructure and mechanical properties of laminated Ta–Zr coatings, Y.I. CHEN, S.M. CHEN, National Taiwan Ocean University, Taiwan BP-10 Influence of thickness on mechanical and corrosion properties of Ti-Si-N coatings on D2 steel by unbalanced magnetron sputtering., Y.K. CHENG, G.P. YU, J.H. HUANG, National Tsing Hua University, Taiwan BP-11 Effect of Nitrogen Flow Rate on The Structure And Mechanical Properties of TiZrN Thin Films by Unbalanced Magnetron Sputtering, C.W. LU, J.H. HUANG, G.P. YU, National Tsing Hua University, Taiwan BP-12 Ternary d-TixTa1-xN: An addition to superhard materials?, L. KOUTSOKERAS, University of Ioannina, Greece, A. SKARMOUTSOU, National Technical University of Athens, Greece, G. ABADIAS, University of Poitiers, France, P. PSYLLAKI, Technological Education Institute of Piraeus, Greece, C. CHARITIDIS, National Technical University of Athens, Greece, C. LEKKA, P. PATSALAS, University of Ioannina, Greece BP-13 Paramagnetic centers in hard graphite-like amorphous carbon, A. VIANA, C. MARQUES, Universidade Estadual de Campinas, Brazil BP-14 Effects of sputtering gases on the preparation of boron nitride films using RF sputtering, M. IMAMIYA, Graduate School, Chiba Institute of Technology, Japan, Y. SAKAMOTO, Chiba Institute of Technology, Japan Hard <strong>Coating</strong>s and Vapor Deposition Technology Room: Golden Ballroom - Session BP Symposium B Poster Session 5:00 pm BP-15 Influence of Silicon-doping on MSIP Al2O3 coatings, K. BOBZIN, Surface Engineering Institute - RWTH Aachen University, Germany, N. BAGCIVAN, RWTH Aachen University, Germany, M. EWERING, Surface Engineering Institute - RWTH Aachen University, Germany BP-16 3-dimensional DLC coating on microgear by bipolar PBII &D and plasma analysis, W.S. PARK, J.H. CHOI, T. KATO, The University of Tokyo, Japan, W.S. LEE, Korea Institute of Industrial Technology, Republic of Korea BP-17 Mechanical properties and oxidation resistance of TiSiN/CrAlN films synthesized by a cathodic arc deposition process, Y.Y. CHANG, National Formosa University, Taiwan, Y.Y. LIOU, MingDao University, Taiwan BP-18 Structural, Mechanical and Tribological Properties of TiTaBN CompositeGraded <strong>Coating</strong>s Deposited by CFUBMS Technique, Ö. BARAN, Erzincan University, Turkey, İ. EFEOGLU, Ataturk University, Turkey, B. PRAKASH, Lulea Technical University, Sweden BP-19 Effect of Si + kinetic energy on the physical properties of Ti-Si-N thin films deposited by RCBPLD, L. ESCOBAR-ALARCON, E. CAMPS, V. MEDINA, National Institute for Nuclear Research, Mexico, D. SOLIS-CASADOS, Autonomus University of Mexico State, Mexico, I. CAMPS, Mexican National Autonomous University, Mexico BP-20 The Role of Aluminium for the Nanostructure and Mechanical Properties of Sputtered Ti-B Films, P. EPAMINONDA, University of Cyprus, Cyprus, K. POLYCHRONOPOULOU, Northwestern University, US, K. FADENBERGER, Robert Bosch GmbH, Germany, M. BAKER, University of Surrey, UK, P. GIBSON, Joint Research Centre, Italy, A. LEYLAND, A. MATTHEWS, University of Sheffield, UK, P.H. MAYRHOFER, Montanuniversität Leoben, Austria, C. REBHOLZ, University of Cyprus, Cyprus BP-21 Microstructural characteristics of CrZrSiN coatings synthesized by unbalanced magnetron sputtering with CrZrSi segment targets, KIM, S.Y. LEE, Korea Aerospace University, Republic of Korea BP-22 Synthesis and characterization of CrZrAlN coatings synthesized by unbalanced magnetron sputtering, J.Y. KIM, D.J. KIM, B.S. KIM, S.Y. LEE, Korea Aerospace University, Republic of Korea BP-23 Mechanical Performance and Nanoscaled Deformation of Bias-Sputtered (AlCrTaTiZr)NCy Multi-component <strong>Coating</strong>s, S.Y. LIN, S.Y. CHANG, Y.C. HUANG, F.S. SHIEU, National Chung Hsing University, Taiwan BP-24 Effects of Substrate Temperature and Bias-Voltage on Mechanical Properties and Oxidation Resistance of TiAlYN Films, N. HATTORI, Keio University, Japan, T. TAKAHASHI, Yungaloy Corporation, Japan, M. NOBORISAKA, T. MORI, M. TAKAHASHI, T. SUZUKI, Keio University, Japan BP-26 Characterization of laser ablation bismuth and iron oxide plasmas used for deposition of bismuth-iron-oxide thin films, E. CAMPS, D. CARDONA, L. ESCOBAR- ALARCON, National Institute for Nuclear Research, Mexico, S. E. RODIL, Mexican National Autonomous University, Mexico BP-27 A study of W/DLC/WSC composite films fabricated by magnetron sputtering method, M. DAI, C. WEI, S. LIN, H. HOU, K. ZHOU, Guangdong General Research Institute of Industrial Technology, China BP-28 Comparison of the wear characteristics of TIN <strong>Coating</strong> with Manganese Phosphate <strong>Coating</strong>., S. SIVAKUMARAN, A. ALANGARAM, Sri Venkateswara College of Engineering, India TS-31
- Page 1 and 2:
I C M C T F 2 0 1 2 INTERNATIONAL C
- Page 3 and 4:
TABLE OF CONTENTS Welcoming Remarks
- Page 5 and 6:
2012 ICMCTF SCHEDULE OF EVENTS DAY
- Page 7 and 8:
SYMPOSIUM A Coatings for Use at Hig
- Page 9 and 10: Marco Cremona Pontificia Universida
- Page 11 and 12: Exhibitor Keynote Lecture Tuesday,
- Page 13 and 14: 2011/12, discuss ideas and prioriti
- Page 15 and 16: At the focus topic, from the experi
- Page 17 and 18: 2012 R.F. Bunshah Annual Award & IC
- Page 19 and 20: ICMCTF 2012 Graduate Student Awards
- Page 21 and 22: ICMCTF 2012 thanks Plansee for thei
- Page 23 and 24: ICMCTF 2012 thanks AJA Internationa
- Page 25 and 26: ICMCTF 2012 thanks CemeCon for thei
- Page 27 and 28: ICMCTF 2012 Short Courses April 22
- Page 29 and 30: ICMCTF 2012 Planning Grid We provid
- Page 31 and 32: Key to Session/Paper Numbers A Coat
- Page 33 and 34: Monday Morning, April 23, 2012 Fund
- Page 35 and 36: New Horizons in Coatings and Thin F
- Page 37 and 38: Fundamentals and Technology of Mult
- Page 39 and 40: Advanced Characterization of Coatin
- Page 41 and 42: Hard Coatings and Vapor Deposition
- Page 43 and 44: Tribology & Mechanical Behavior of
- Page 45 and 46: Hard Coatings and Vapor Deposition
- Page 47 and 48: Coatings for Use at High Temperatur
- Page 49 and 50: Applications, Manufacturing, and Eq
- Page 51 and 52: Wednesday Afternoon, April 25, 2012
- Page 53 and 54: Coatings for Use at High Temperatur
- Page 55 and 56: Tribology & Mechanical Behavior of
- Page 57 and 58: Coatings for Use at High Temperatur
- Page 59: Tribology & Mechanical Behavior of
- Page 63 and 64: Thursday Afternoon Poster Sessions
- Page 65 and 66: Thursday Afternoon Poster Sessions
- Page 67 and 68: Thursday Afternoon Poster Sessions
- Page 69 and 70: Thursday Afternoon Poster Sessions
- Page 71 and 72: Tribology & Mechanical Behavior of
- Page 73 and 74: Free Caricatures & Massages!! E-1 V
- Page 75 and 76: ICMCTF 2012 EXHIBIT HALL Internatio
- Page 77 and 78: I C M C T F 2012 S P O N S O R S Bo
- Page 79 and 80: All in Good Measure A 24 µm scan o
- Page 81 and 82: Call For Abstracts Deadline: MAY 2,
- Page 83: CC800 ® /9 HIPIMS true integration
- Page 86: Exhibit Hall Reception - Atlas Ball
- Page 89: Kaufman & Robinson announces their
- Page 93 and 94: Miba Coating Group is the specialis
- Page 95 and 96: PLANSEE SE, 6600 Reutte, Austria, T
- Page 98 and 99: � ����������
- Page 101 and 102: Plenary Talk Room: Golden Ballroom
- Page 103 and 104: content. Analyses of the oxidised c
- Page 105 and 106: - The control on the gradient in re
- Page 107 and 108: μ = 0.4 to μ = 0.9). On the other
- Page 109 and 110: Hard Coatings and Vapor Deposition
- Page 111 and 112:
application tests the ta-C coated d
- Page 113 and 114:
4:10pm C2-2/F4-2-10 Investigation o
- Page 115 and 116:
process with surfactant on WO3/ITO
- Page 117 and 118:
is already reported. To further com
- Page 119 and 120:
conditions. The details of the comp
- Page 121 and 122:
esidual stress and to the Poisson
- Page 123 and 124:
Coatings for Use at High Temperatur
- Page 125 and 126:
eactive gases with the target mater
- Page 127 and 128:
Hard Coatings and Vapor Deposition
- Page 129 and 130:
emerging fields. State-of-the-art t
- Page 131 and 132:
transparent conducting layers. Howe
- Page 133 and 134:
methods provide similar carrier den
- Page 135 and 136:
of AISI 52100 steels by developing
- Page 137 and 138:
deposition based on high power puls
- Page 139 and 140:
Coatings for Use at High Temperatur
- Page 141 and 142:
coatings removed from the aluminum
- Page 143 and 144:
spectroscopy varies from 25 at% to
- Page 145 and 146:
This article describes how to use s
- Page 147 and 148:
een demonstrated both theoretically
- Page 149 and 150:
Furthermore, the silane coupling ag
- Page 151 and 152:
10:40am A1-1-9 High temperature oxi
- Page 153 and 154:
10:40am B4-2-10 Understanding the d
- Page 155 and 156:
11:00am B5-1-10 Hard nanocrystallin
- Page 157 and 158:
* Sandia National Laboratories is a
- Page 159 and 160:
fluidized bed of tin, zinc and alum
- Page 161 and 162:
Coatings for Use at High Temperatur
- Page 163 and 164:
mechanical and chemical properties.
- Page 165 and 166:
duration for super-low friction see
- Page 167 and 168:
stainless steel DIN X42Cr13 surface
- Page 169 and 170:
2:30pm TS1-1-3 Surface engineering
- Page 171 and 172:
Coatings for Use at High Temperatur
- Page 173 and 174:
Hard Coatings and Vapor Deposition
- Page 175 and 176:
X-ray diffraction patterns of the Z
- Page 177 and 178:
11:20am B6-1-11 Direct current magn
- Page 179 and 180:
loading situations could help to ob
- Page 181 and 182:
Energetic Materials and Micro-Struc
- Page 183 and 184:
The present work was supported by t
- Page 185 and 186:
silica-based hydrophilic coatings i
- Page 187 and 188:
extent depending on the actual grow
- Page 189 and 190:
[1] F. Tasnádi, B. Alling, C. Hög
- Page 191 and 192:
eproducibility of the preparation o
- Page 193 and 194:
showed by the uncoated 4140 steel s
- Page 195 and 196:
polarization resistance and corrosi
- Page 197 and 198:
thin films in which a multiscale mo
- Page 199 and 200:
centers, ascribed to conduction ele
- Page 201 and 202:
BP-26 Characterization of laser abl
- Page 203 and 204:
BP-38 Stress signature of an amorph
- Page 205 and 206:
simultaneously optimize materials p
- Page 207 and 208:
CP-17 Effects of UV Light Treatment
- Page 209 and 210:
amorphous structure with a smooth s
- Page 211 and 212:
addition, it was observed that the
- Page 213 and 214:
EP-5 The effective Indenter concept
- Page 215 and 216:
the substrates directly or after ra
- Page 217 and 218:
as-grown films using textured Si as
- Page 219 and 220:
proposed memory device exhibits exc
- Page 221 and 222:
FP-24 Effect of hydrogen addition o
- Page 223 and 224:
oxide obtained was correlated to th
- Page 225 and 226:
Post Deadline Discoveries and Innov
- Page 227 and 228:
chemical bonds have also been achie
- Page 229 and 230:
9:40am B3-1-6 Compressive stress ge
- Page 231 and 232:
10:20am D2-1-8 Corrosion Resistance
- Page 233 and 234:
property combination is attractive
- Page 235 and 236:
PVD is a challenging task. The pres
- Page 237 and 238:
Chang, G.W.: C2-3/F4-3-3, 29; GP-3,
- Page 239 and 240:
Huang, K.H.: BP-33, 102 Huang, P.H.
- Page 241 and 242:
Moody, N.R.: F6-1-1, 7 Moon, S.: D1
- Page 243 and 244:
Szeremley, D.: G3-1-7, 68 Szesz, E.
- Page 245 and 246:
NOTES 145
- Page 247 and 248:
Description of Research Highlights:
- Page 249 and 250:
their presentations in order to eva
- Page 251 and 252:
NOTES 151
- Page 253 and 254:
153
- Page 255 and 256:
MARK YOUR CALENDAR FOR ICMCTF 2013!