User Manual Samsung SRD-470D/470DC DVR

SPOT OUTThe Spot Out monitoring is independent of the Live mode, which monitors a specific channel through the Spot Outport.Selecting a Spot Out modeIf an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, youcan select a output screen mode.1. In Live mode, right-click any area on the screen.The Live menu appears.2. Click Spot Out.Supports the Spot output in Single screen with AutoSequence mode. The Spot output is supported only for a designated channel.For the Spot Out port of a model, refer to “Part Names andFunctions (Rear)”. (Page 9)Scene Mode 2011-01-01 01:10:25Spot Out Spot Out 1 Auto SequenceZOOMAudio OffFreezeStop AlarmRecordPlaySearchBackupMain MenuShutdownHide LauncherLogoutSingle CH1CH2CH3CH4 LIVE2011-01-0101:10:25< Multichannel l Live Menu >ZOOMThis is available only in Single Live mode. In Single mode, select a desired area and use the Zoom function toenlarge it twice.1. Select in the right-click menu.Press the [ZOOM] button on the front panel or the remote control, or simply click < > in the launchermenu. The zoom box appears.2. Use the direction keys, or drag and drop to specify an area to enlarge.3. Press the [ENTER] button, or double-click the selected area to enlarge it twice. In the enlarged image, use the direction buttons (◄ ►) on the remote control or the front panel to move theenlarged area.4. Press the [ZOOM] button on the front panel or the remote control, or simply click < > in the launchermenu to release the zoom.2011-01-01 01:10:25English _29