User Manual Samsung SRD-470D/470DC DVR

• Focus : Enables you to adjust the focus manually.• Auto Pan : The camera automatically runs between the two points that you selected.• Scan : The camera moves to the preset points in the specified sequence.If multiple presets are specified, the PTZ camera will automatically move to all of the preset points one at atime.• Pattern : Makes the PTZ camera remember and follow the past route. The functions of Auto Pan, Scan and Pattern are supported in the protocols of Samsung, Panasonic and Pelco, and aredifferent in terms of the name and setting, depending on the protocols of Samsung, Panasonic and Pelco.(Panasonic : Auto Pan, Sequence, Sort / Pelco : Auto Pan, Frame Scan (Scan), Pattern)M Before entering the PTZ device control mode, set the values of the PTZ device in the menu.(Page 43)Preset SettingA preset is a set of specific target points of a PTZ camera, and up to 20 presets per a camera can be stored.Using the mouse may help make setup easier.1. In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.2. Select the key.The virtual keyboard for inputting the preset will appear. Refer to “Using Virtual Keyboard”. (Page 34) USING THE DVR• Save : You can save the preset settings.• Rename : You can change the settings of the existing presets.• Delete : Deletes the selected preset.• Delete All : Deletes all existing presets.M If you replace the camera of the channel that stores the preset list with a new one, you should reset the presetaccordingly.3. Press .The preset will be saved as a name that you entered.Camera SettingA PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.Using the mouse may help make setup easier.1. Connect the PTZ camera to the DVR and run the PTZcamera again to display the camera’s protocol settingwindow.2. Check the protocol ID of the camera. In “Device > Setting the PTZ”, enter the PTZ camera ID in theID input box of the channel that is connected to the PTZ camera.(Page 43)2011-01-01 01:10:25SAMSUNG PROTOCOLADDR 0TYPERS-485,HALFBAUD 9600LENSOK!TILTOK!PANOK!3. Select in the PTZ Control menu.The camera-specific menu appears. You can configure the settings of only those cameras that supportthe protocols of Samsung, Pelco D/P, AD and Panasonic. If you are setting Auto Pan or Pattern in the camera menu, pressand hold the appropriate button for a certain time so that the buttonoperation can be different from that in normal PTZ setting.2011-01-01 01:10:25** MAIN MENU **CAMERA SET...VIDEO SET...PRESET...ZONE SET...Camera SetupAUTO SET...ALARM SET...OTHER SET...CLOCK SET...ExitSYSTEM INFO...English _65