User's Manual - Pixord

Note: If FTP session quits immediately after issued by command, you should continue pinging the NDCinstantly. If the NDC replies to the ping command right after pinging, it means the NDC may not enter theself-programming stage to verify the software version. If not updated, then you should reboot the NDCand back to step 3 to try again.For example, the NDC IP address is 192.168.0.200, thenC:\temp>ftp 192.168.0.200Connected to 192.168.0.200.220 192.168.0.200 NDC FTP server (ARM_BE - V3.0.H) ready.User (192.168.0.200:(none)): root331 Password required for root.Password: bin200 Type set to I.ftp> put flash.bin200 PORT command successful.150 Opening BINARY mode data connection for flash.bin226 Transfer complete.ftp: 2097152 bytes sent in 10.11Seconds 207.43Kbytes/sec.ftp> bye221 Goodbye.