User's Manual - Pixord

4.8 Configuration of Event– GeneralTriggerSystem provides “GPIN” and “Motion Detection” for event detection.• GPIN & GPIO Input Status : They are auto detected and display the status.• Motion Detection : Make a checkmark on this option to start detect the motion area. See next segment to set themotion area.• Track (On/ Off) : Turning on or off the tracking functionActionMake a checkmark on either FTP Image, Mail Image, or on all of them, to determine what action should be takenwhen the event is triggered.• FTP Image : Send the image to the configured FTP site when event is triggered. Click on the link to set the FTPserver.• Mail Image: Send the image to the configured mail address when event is triggered. Click on the link to set theEmail addresses.• Alert Message Status : They are auto detected to display the status, the signal can be used with the recordingapplication software on PC.Apply : Click this button to save the changes made.57