User's Manual - Pixord

– Operating the Dome CameraTo control the dome camera for viewing, follow the description shown on below:Pan / Tilt the Dome CameraTo control the pan and tilt movement of the dome camerasimply click on the buttons:• To pan or tilt, just click on the 8-directions buttons for thedesired direction.• To adjust the speed of the movement, just click on thearrow button beside “Speed” and select the desiredspeed from the pull-down list. The higher the numberselected, the faster the speed.180 o RevolveThe viewing angle will turn 180 o .Zoom Lens Control• To zoom in: Click [+] button, the viewing angle becomesnarrower and target will become enlarged on the screen.• To zoom out: Click [-] button, the viewing angle becomeswider and target will become smaller on the screen.Iris ControlThe purpose of iris control is to adjust brightness on target. Itcan be set as Auto Iris or Manual Iris.• Iris open: Click [+] button, to open the iris and brightenthe picture.• Iris close: Click [-] button, to open the iris and reduceglare.• Auto iris: Click the arrow button beside “Auto Iris”, thelens will automatically adjust itself for optimum iris.Focus ControlThe focus function can be set as Auto Focus or ManualFocus.• Manual focus near: Click [+] button, the target willbecome farther.• Manual focus far: Click [-] button, the target will becomenearer.• Auto focus: Click the arrow button beside “Auto Focus”,the lens will automatically adjust itself for optimum focus.44