User's Manual - Pixord

4. Verify updated contentsAfter uploading the custom pages, open browser to verify the correctness of contents. If not correct, modify thepages and return to previous step to upload again.5. Save the changes to flashTelnet to the NDC. And run command “Up –w” to write the complete web pages into flash. The detailedprocedures are list as below,• Open DOS window• Enter “telnet ”• Enter “root” and “pass” as username and password• Enter “Up –w” to start the web content update program.The command is case sensitive. Don’t enter the wrong case or you’ll get the command not find error message.After processing about 30 seconds, the NDC will restart automatically and complete the web content updating.Now you can open the browser to see the new web content.Note: The limitation of overall size of content pages is around 700K Bytes. Any file added/updated plusoriginal downloaded file (~550K Bytes) should not exceed this size; otherwise, some files will be truncated orcorrupted. If the corruption of any page happens, you will have to reload the original binary in order to recoverthe corruption.For example, the NDC IP address is 192.168.0.200, thenC:\temp>telnet 192.168.0.200C:\temp>Telnet sessionOpen Telnet sessionLogin: rootPassword:Enter “pass” as defaultWelcome to VidSvr on Telnet ...IVS> Up –wUpgrade WWW Pages... Frozen here, close and open browserAfter 30 seconds to verify the changes.122