User's Manual - Pixord

Auto Gain Control SelectionThere are 3 different AGC levels can be selected. (Low = 8dB ; Medium = 22dB ; High = 36dB). Different AGC levelsmay make different camera performance under low light environment. (Factory Default AGC is Medium)1. Click OSD(Enter) to recall OSD Setup Menu.2. Click the Up or Down button to select 2nd item "AGC" on menu.3. Click Left or Right button to make selection : High -> Low -> Medium4. Click ESC button to exit menu, when finish or click Up or Down button to select next item.Sensitivity Up (Enhancement)Sensitivity Up function allows user to select different Video Gain (Y Gain) control. (Factor Default is AUTO)• AUTO : System auto turn on or off Video Gain Control function according to target's brightness.• ON : Video Gain Control Enhancement always on.• OFF : Video Gain Control Enhancement always off.1. Click OSD(Enter) to recall OSD Setup Menu.2. Click the Up or Down button to select 3rd item "SENS UP" on menu.3. Click Left or Right button to make selection : Auto -> On -> Off4. Click ESC button to exit menu, when finish or click Up or Down button to select next item.62