User's Manual - Pixord

3. Position the cursor beside BLC SPEED and select the back light compensation converging speed by clicking theLeft or Right button.Note: Increase the value will result in a faster converging speed.4. Position the cursor beside BLC REGION and select the back light compensation converging region by clicking theLeft or Right button. Region changes as follows :5. Position the cursor beside RET and click OSD(Enter) to return to CAMERA SETUP MENU.Expose Mode AE Shutter SettingPosition the cursor beside Expose Mode AE Shut and click OSD(Enter) to enter Expose Mode AE SHUT.1. Position the cursor beside LOW Lux MODE and select a field by clicking the Left or Right button. See page 64 ~66 for detailed setup.2. Position the cursor beside BACK LIGHT and select ON or OFF by clicking the Left or Right button. See page 67,68 for detailed setup.3. Position the cursor beside SHUTTER SPD and select shutter speed by clicking the Left or Right button.Shutter Speed Mode changes as follows :79