User's Manual - Pixord

Back Light CompensationBack Light Compensation can be turned on or off. (Factory Default is OFF)1. Click OSD(Enter) to recall OSD Setup Menu.2. Click the Up or Down button to select 4th item "BLC" on menu.3. Click Left or Right button to make selection : On -> OffNote : When "ON" is selected, BLC zone will be showed on monitor screen.4. Click ESC button to exit menu, when finish or click Up or Down button to select next item.Back Light Compensation Zone SelectionOne of five different zone can be selected for BLC. (Factory Default is Center)1. Click OSD(Enter) to recall OSD Setup Menu.2. Click the Up or Down button to select 5th item "BLC Region" on menu.3. Click Left or Right button to make selection : Top -> Bottom -> Left -> Right -> Center4. Click ESC button to exit menu, when finish or click Up or Down button to select next item.FlickerlessFlickerless function can be turned on or off. (Factory Default is OFF)1. Click OSD(Enter) to recall OSD Setup Menu.2. Click the Up or Down button to select 6th item "Flickerless" on menu.3. Click Left or Right button to make selection : On -> OffNote : When "ON" is selected, Shutter Speed will be fixed at 1/100 sec in NTSC or fixed at 1/120 sec in PAL.63