User's Manual - Pixord

More documents

Recommendations

Info

‣ Green power, fan needless, and hardware watchdog providing robustnesssystem in critical environment.‣ Standard BNC connectors, automatic video standard (NTSC/PAL) detection.‣ Including CCD/CMOS module, this provides all in one system for Internetvideo application. (PiXORD NC only)‣ One additional external video input and one internal video output. (PiXORD120/126/128 only)‣ Three additional external video inputs and one internal video output.(PiXORD 240/241 only)‣ Providing live streaming voice via integrated the PiXORD Voice Server(“PiXORD VOS” hereinafter)6 / 88
2 Physical Connections2.1 Front Panel2.1.1 PiXORD IVS‣ POWER/STATUS LEDPower On: constant red.Emergency factory default (refer to Appendix C -Emergency Factory Default)Blinking orange (i.e. red mixed with green).‣ NETWORK LEDNetwork Link (connected): Constant red.Networks have activities: Blink red.Data sent out from server: Blink green.Network disconnected: Constant slow blinking green.Upgrading software (refer to Appendix A -Upgrading the Software): Constant slowto fast blinking of orange.2.1.2 PiXORD NC‣ Camera: Built-in camera Module.Support AES / BLC / Day & Night control (PiXORD 100/120/126/128 only).Support WB (4 mode) / BLC / AGC / AE / ME / Flickerless / Line Lock control(PiXORD 200/126/128/240/241 only).7 / 88
Page 1 and 2: PiXORD241/240/200/205/120/100/126/1
Page 3 and 4: 5.1.1 Configurations Overview......
Page 5: 1 Introduction1.1 What is PiXORD Ne
Page 9 and 10: 2.2.2 PiXORD NCPiXORD 100 PiXORD 12
Page 11 and 12: 3 Installation3.1 System Requiremen
Page 13 and 14: 3.3 Network Camera Installation Pro
Page 15 and 16: 3.4 P128 Installation Procedure3.4.
Page 17 and 18: ‣ Adjust VR1 to set Infrared LED
Page 19 and 20: 3.6 Assign IP Address by ARP3.6.1 N
Page 21 and 22: Enter “http://192.168.0.200” in
Page 23 and 24: 3.7.4 Verify the IP Address and Ope
Page 25 and 26: 4 PiXORD NVS Home Page4.1 Browsing
Page 27 and 28: 5 PiXORD NVS Configuration Page5.1
Page 29 and 30: ‣ Event ConfigurationsFunctions D
Page 31 and 32: PiXORD NVS provides 3- layer user s
Page 33 and 34: 5.2.4 System commands‣ Load Defau
Page 35 and 36: devices which could access up to 65
Page 37 and 38: ‣ Dynamic DNS Activate: Click on
Page 39 and 40: 5.4 I/O Configuration5.4.1 Serial P
Page 41 and 42: 5.5 Video5.5.1 Time StampDisplay Ti
Page 43 and 44: Click "Save Changes" bottom if need
Page 45 and 46: 5.5.5 CCD Module Settings (PiXORD 2
Page 47 and 48: Note: The programmable event script
Page 49 and 50: 5.7 Voice Management5.7.1 Voice Adj
Page 51 and 52: 6 Appendix6.1 Upgrading the Softwar
Page 53 and 54: 150 Opening BINARY mode data connec
Page 55 and 56: 3.0.0/WWW/images.Note: Any file upl
Page 57 and 58:
‣ The IP address is located withi
Page 59 and 60:
485A485BTo connect with external PT
Page 61 and 62:
‣ GPIO Terminal BlockPinName1 EXT
Page 63 and 64:
‣ GPIO MINI-DINPinName1 GPIN12 GP
Page 65 and 66:
‣ Video Input1 Channels1.0 Vp-p,
Page 67 and 68:
6.7.2 PiXORD 2000PiXORD 2000‣ Vid
Page 69 and 70:
‣ Weight0.93 kg, excluding power
Page 71 and 72:
‣ Operating Temperature5 °C~50°
Page 73 and 74:
- Video throughput: Up to 30 frames
Page 75 and 76:
‣ Hardware- CPU: 32 Bits RISC Pro
Page 77 and 78:
6.7.6 PiXORD 200‣ Video Channel1
Page 79 and 80:
- DirectX 9.0c‣ Security- Three-l
Page 81 and 82:
FTP image to remote site;E-mail ima
Page 83 and 84:
- One RS-232 serial port for extern
Page 85 and 86:
2x LEDs to indicate network and pow
Page 87 and 88:
6. HTTP server push to remote site
show all

User's Manual - Pixord

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?