SYNTEC CNC Application manual - Winter Holztechnik

SYNTEC CNC application manualNO Descriptions Range Unit Detail setting description221~240 Type of servo axis [0,5] 0:linear axis1-5:Rotary axis241~260 *The second sensor [0,20]input axis of dualTo set the dual feedback (Opticalscale) refer to the machine axis.feedback systemrefer to the machineaxis.261~280 The resolution ofsecond sensor for thedual feedback.(Pulse/mm)281~300 Type of the Radiusand Diameterdisplay in axis.301~320 The feedback gain ofthe second sensor indual loop system.[100,2500000]pulse/mmThe resolution of second sensor forthe dual feedback. (Pulse/mm) A/Bfrequency.[0,1] 0:Radius1:DiameterAfter change the setting allfollowing parameters are set as thedisplay. For example if thedisplay is in diameter, then all thefollowing values are also indiameter:Zero offsetReference pointSoftware travel limit[1,4] All are set as 4 for encoder oroptical scale.321~340 Name of the axis [00100,10999] To set the name of the axis1st & 2nd number for axis Namedisplay or not00=>enable;01=>disable;3th number for the alpha of axis asfollowing:X=>1;Y=>2;Z=>3;A=>4;B=>5;C=>6;U=>7;V=>8;W=>9;341~360 Division of positioncommand gainLast two number for low casenumber。Example:X 2 setting is102,W 23 setting is 923X setting is 100[1,999999999] Division of position commandgain32