SYNTEC CNC Application manual - Winter Holztechnik

SYNTEC CNC application manualItem Code Name、range DescriptionBit44th set axis is couplingR610 SKIP Skip Position Latched G31 or G28.1 skip commandtouch the skip signal and recordthat position。Bit 0 not usedBit 1 for first axis (X) skip occurBit 2 for second axis (Y) skipoccurBit 3 for third (Z) skip occurBit 4 for 4 th skip occur…R611 AXMO Axis Movement Flag Each axis movement statusBit 0 not usedBit 1 for 1 st axis (X) is movingBit 2 for 2 nd axis (Y) is movingBit 3 for 3 rd axis (Z) is movingBit 4 for 4 ed axis is movingR612R613Machine Positive DirectionLockMachine NegiaiveDirection Lock…Bit 0 not usedBit 1 for 1 st axis (X)Bit 2 for 2 nd axis (Y)Bit 3 for 3 rd axis (Z)Bit 4 for 4 th axis…..Bit 0 not usedBit 1 for 1 st axis (X)Bit 2 for 2 nd axis (Y)Bit 3 for 3 rd axis (Z)Bit 4 for 4 th axis…..R614 Axis Coupling Request Bit 0,1 not usedBit22nd set axis is couplingrequestBit33rd set axis is couplingrequestBit44th set axis is couplingrequestR615~R618Second M/S/T ExecutionChannelSecond M/S/T codeR615 command and statusR616 M codeR617 S codeR618 T codePLCR/WRR615.0 MST code finish(PLC=>CNC)R615.1 DEN moving commandfinish (CNC=>PLC)R615.2 M code read(CNC=>PLC)70