SYNTEC CNC Application manual - Winter Holztechnik

SYNTEC CNC application manualItem Code Name、range DescriptionR584Rotating the spindlecounterclockwisecontrolled by C64Bit0,1,5-31ReservedBIT 2 Rotating the 2 nd spindlecounterclockwiseBIT 3 Rotating the 3 th spindlecounterclockwiseBIT 4 Rotating the 4 th spindlecounterclockwiseNote:1 st spindle counterclockwise iscontrolled by C65R585 Spindle JOG Mode Spindle Jog ModeBit0,1,5-31ReservedBIT 2 ON 2 nd spindle JOGmodeBIT 3 ON 3 th spindle JOGmodeBIT 4 ON 4 th spindle JOGmodeNote: 1 st spindle JOG mode iscontrolled by C60R586 Spindle Orientation Stop This Register can executeSpindle to do Orientation. Butthe flag state need to be ON untilOrientation finish.Bit0,1,5-31ReservedBIT 2 ON 2 nd spindleOrientationBIT 3 ON 3 th spindleOrientationBIT 4 ON 4 th spindleOrientationR587Spindle Orientation StopFinishNote: 1 st spindle Orientation iscontrolled by C61Bit0,1,5-31ReservedBIT 1 ON 1 st spindleOrientation finishBIT 2 ON 2 nd spindleOrientation finishBIT 3 ON 3 th spindleOrientation finishBIT 4 ON 4 th spindleOrientation finishR588 Rigid Tapping Mode BIT 1 ON 1 st spindle rigidtapping modeBIT 2 ON 2 nd spindle rigidtapping modeBIT 3 ON 3 th spindle rigidtapping modeBIT 4 ON4 th spindle rigidPLCR/W67