SYNTEC CNC Application manual - Winter Holztechnik

SYNTEC CNC application manualItem Code Name、range DescriptionR602Spindle Y-Delta RequestModegoes fast , MGP reverse , themachine reverse,MPG stops,themachine stops , it’s great fortesting and processing。Bit 0 not usedBit 1 for 1 st axis (X) MPGsimulationBit 2 for 2 nd axis (Y) MPGsimulationBit 3 for 3 rd axis (Z) MPGsimulationBit 4 for 4 ed axis MPG simulation…Bit1 ON1 st spindle UVW isDelta connectedBit1 OFF1 st spindle UVW isY connectedBit2 ON2 nd spindle UVW isDelta connectedBit2 OFF2 nd spindle UVW isY connectedBit3 ON3 rd spindle UVW isDelta connectedBit3 OFF3 rd spindle UVW isY connectedBit4 ON4 th spindle UVW isDelta connectedBit4 OFF4 th spindle UVW isY connectedR604 TEACHIN Teach In command Teach the interface to entercommand areaBit 0 fast placed end teachBit 1 the straight line slice endteachBit 2 the circle line slice teach,the first touch is the middle ofcircle input,the second touch isthe end of the circle input。R605 Tool Offset Write Tool Offset WriteBit0Function EnableBit1Z+ WriteBit2Z- WriteBit3X+ WriteBit4X- WriteR606~ReservedR608R609 Axis Coupling Status Bit11st set axis is couplingBit22nd set axis is couplingBit33rd set axis is couplingPLCR/W69